Saltar navegación principal
Estás en: Home>Normas y Libros>Buscador de normas
Refina tu búsqueda
Normas

Para búsqueda de normas ISO, ASTM, IEC e IEEE, utilizar términos en inglés

Estado
Idioma

Buscador de normas

Buscador de normas

Resultados para:

Número de resultados: 92

UNE 7050-3:1997  UNE

Estado: Vigente / 2010-05-06

Tamices y tamizado de ensayo. Parte 3: Exigencias técnicas y verificaciones de los tamices de ensayo de tela metálica.

CTN 7 ENSAYOS DE MATERIALES

UNE 7050-4:1997  UNE

Estado: Vigente / 2010-05-06

Tamices y tamizado de ensayo. Parte 4: Exigencias técnicas y verificación de tamices de chapa perforada.

CTN 7 ENSAYOS DE MATERIALES

UNE 7050-5:1997  UNE

Estado: Vigente / 2010-05-06

Tamices y tamizado de ensayo. Parte 5: Exigencias técnicas y verificaciones de los tamices de ensayo en láminas electroformadas.

CTN 7 ENSAYOS DE MATERIALES

UNE 7050-1:1997  UNE

Estado: Vigente / 2010-05-06

Tamices y tamizado de ensayo. Parte 1: Vocabulario.

CTN 7 ENSAYOS DE MATERIALES

UNE 7050-2:1997  UNE

Estado: Vigente / 2010-05-06

Tamices y tamizado de ensayo. Parte 2: Telas metálicas, chapas perforadas y láminas electroformadas. Medidas nominales de las aberturas.

CTN 7 ENSAYOS DE MATERIALES

UNE 7060-1:1997  UNE

Estado: Vigente / 2010-05-06

Representación de resultados obtenidos por análisis granulométrico. Parte 1: Representación gráfica.

CTN 7 ENSAYOS DE MATERIALES

UNE-ISO 9277:2009  UNE

Estado: Vigente / 2009-02-11

Determinación del área superficial específica de los sólidos mediante la adsorción de gas utilizando el método BET.

CTN 7 ENSAYOS DE MATERIALES

ISO 13320:2009  ISO

Estado: Vigente / 2009-09-18

Particle size analysis -- Laser diffraction methods

ISO 22412:2017  ISO

Estado: Vigente / 2017-02-06

Particle size analysis -- Dynamic light scattering (DLS)

ISO 3310-1:2016  ISO

Estado: Vigente / 2016-07-21

Test sieves -- Technical requirements and testing -- Part 1: Test sieves of metal wire cloth

ISO 21501-4:2018  ISO

Estado: Vigente / 2018-05-18

Determination of particle size distribution -- Single particle light interaction methods -- Part 4: Light scattering airborne particle counter for clean spaces

ISO 3310-2:2013  ISO

Estado: Vigente / 2013-08-13

Test sieves -- Technical requirements and testing -- Part 2: Test sieves of perforated metal plate

ISO 21501-2:2007  ISO

Estado: Vigente / 2007-05-07

Determination of particle size distribution -- Single particle light interaction methods -- Part 2: Light scattering liquid-borne particle counter

ISO 21501-3:2007  ISO

Estado: Vigente / 2007-05-07

Determination of particle size distribution -- Single particle light interaction methods -- Part 3: Light extinction liquid-borne particle counter

ISO/TR 19997:2018  ISO

Estado: Vigente / 2018-09-19

Guidelines for good practices in zeta-potential measurement

ISO 15901-1:2016  ISO

Estado: Vigente / 2016-04-04

Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption -- Part 1: Mercury porosimetry

ISO/TR 13097:2013  ISO

Estado: Vigente / 2013-05-30

Guidelines for the characterization of dispersion stability

ISO 13099-2:2012  ISO

Estado: Vigente / 2012-06-18

Colloidal systems -- Methods for zeta-potential determination -- Part 2: Optical methods

ISO 21501-1:2009  ISO

Estado: Vigente / 2009-05-22

Determination of particle size distribution -- Single particle light interaction methods -- Part 1: Light scattering aerosol spectrometer

ISO 15900:2009  ISO

Estado: Vigente / 2009-05-12

Determination of particle size distribution -- Differential electrical mobility analysis for aerosol particles

ISO 14488:2007  ISO

Estado: Vigente / 2007-12-10

Particulate materials -- Sampling and sample splitting for the determination of particulate properties

ISO 15901-2:2006/Cor 1:2007  ISO

Estado: Vigente / 2007-05-07

ISO 15901-2:2006/Cor 1:2007

ISO 15901-3:2007  ISO

Estado: Vigente / 2007-04-16

Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption -- Part 3: Analysis of micropores by gas adsorption

ISO 15901-2:2006  ISO

Estado: Vigente / 2006-12-11

Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption -- Part 2: Analysis of mesopores and macropores by gas adsorption

ISO 14887:2000  ISO

Estado: Vigente / 2000-09-07

Sample preparation -- Dispersing procedures for powders in liquids

ISO 18747-2:2019  ISO

Estado: Vigente / 2019-07-03

Determination of particle density by sedimentation methods -- Part 2: Multi-velocity approach

ISO 18747-1:2018  ISO

Estado: Vigente / 2018-03-22

Determination of particle density by sedimentation methods -- Part 1: Isopycnic interpolation approach

ISO 9276-4:2001/Amd 1:2017  ISO

Estado: Vigente / 2017-11-01

Additional explanations and minor corrections

ISO/TS 14411-1:2017  ISO

Estado: Vigente / 2017-05-10

Preparation of particulate reference materials -- Part 1: Polydisperse material based on picket fence of monodisperse spherical particles

ISO 20998-3:2017  ISO

Estado: Vigente / 2017-04-21

Measurement and characterization of particles by acoustic methods -- Part 3: Guidelines for non-linear theory

ISO 19430:2016  ISO

Estado: Vigente / 2016-12-15

Particle size analysis -- Particle tracking analysis (PTA) method

ISO 17867:2015  ISO

Estado: Vigente / 2015-04-24

Particle size analysis -- Small-angle X-ray scattering

ISO 27891:2015  ISO

Estado: Vigente / 2015-02-27

Aerosol particle number concentration -- Calibration of condensation particle counters

ISO 13317-4:2014  ISO

Estado: Vigente / 2014-11-14

Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 4: Balance method

ISO 13099-3:2014  ISO

Estado: Vigente / 2014-06-23

Colloidal systems -- Methods for zeta potential determination -- Part 3: Acoustic methods

ISO 13322-1:2014  ISO

Estado: Vigente / 2014-05-12

Particle size analysis -- Image analysis methods -- Part 1: Static image analysis methods

ISO 9276-2:2014  ISO

Estado: Vigente / 2014-05-12

Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions

ISO 12154:2014  ISO

Estado: Vigente / 2014-03-19

Determination of density by volumetric displacement -- Skeleton density by gas pycnometry

ISO 20998-2:2013  ISO

Estado: Vigente / 2013-08-07

Measurement and characterization of particles by acoustic methods -- Part 2: Guidelines for linear theory

ISO 26824:2013  ISO

Estado: Vigente / 2013-07-15

Particle characterization of particulate systems -- Vocabulary

ISO 9284:2013  ISO

Estado: Vigente / 2013-04-10

Abrasive grains -- Test-sieving machines

ISO 13099-1:2012  ISO

Estado: Vigente / 2012-06-18

Colloidal systems -- Methods for zeta-potential determination -- Part 1: Electroacoustic and electrokinetic phenomena

ISO 9277:2010  ISO

Estado: Vigente / 2010-08-20

Determination of the specific surface area of solids by gas adsorption -- BET method

ISO 9276-6:2008  ISO

Estado: Vigente / 2008-09-09

Representation of results of particle size analysis -- Part 6: Descriptive and quantitative representation of particle shape and morphology

ISO 9276-3:2008  ISO

Estado: Vigente / 2008-06-24

Representation of results of particle size analysis -- Part 3: Adjustment of an experimental curve to a reference model

ISO 13318-2:2007  ISO

Estado: Vigente / 2007-09-18

Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 2: Photocentrifuge method

ISO 13319:2007  ISO

Estado: Vigente / 2007-07-02

Determination of particle size distributions -- Electrical sensing zone method

ISO 13322-2:2006  ISO

Estado: Vigente / 2006-10-25

Particle size analysis -- Image analysis methods -- Part 2: Dynamic image analysis methods

ISO 20998-1:2006  ISO

Estado: Vigente / 2006-07-26

Measurement and characterization of particles by acoustic methods -- Part 1: Concepts and procedures in ultrasonic attenuation spectroscopy

ISO 9276-5:2005  ISO

Estado: Vigente / 2005-08-05

Representation of results of particle size analysis -- Part 5: Methods of calculation relating to particle size analyses using logarithmic normal probability distribution

Número de resultados: 92