Saltar navegación principal
Estás en: Home>Normas y Libros>Buscador de normas

Para búsqueda de normas ISO, ASTM, IEC, IEEE, BSI y DIN utilizar términos en inglés

Estado
Idioma
Buscador de normas

Buscador de normas

Resultados para:

Número de resultados: 179

UNE-EN ISO 4545-3:2018  UNE

Estado: Vigente / 2018-06-27

Materiales metálicos. Ensayo de dureza Knoop. Parte 3: Calibración de los bloques patrón. (ISO 4545-3:2017).

CTN 7 ENSAYOS DE MATERIALES

UNE-EN ISO 4545-2:2018  UNE

Estado: Vigente / 2018-06-27

Materiales metálicos. Ensayo de dureza Knoop. Parte 2: Verificación y calibración de las máquinas de ensayo. (ISO 4545-2:2017).

CTN 7 ENSAYOS DE MATERIALES

UNE-EN ISO 7500-1:2018  UNE

Estado: Vigente / 2018-05-16

Materiales metálicos. Calibración y verificación de máquinas de ensayos uniaxiales estáticos. Parte 1: Máquinas de ensayo de tracción/compresión. Calibración y verificación del sistema de medida de fuerza. (ISO 7500-1:2018).

CTN 7 ENSAYOS DE MATERIALES

UNE 41901:2017 EX  UNE

Estado: Vigente / 2017-06-21

Superficies para tránsito peatonal. Determinación de la resistencia al deslizamiento por el método del péndulo de fricción. Ensayo en húmedo.

CTN 41/SC 11 DESLIZAMIENTO

UNE 41902:2017 EX  UNE

Estado: Vigente / 2017-06-21

Superficies para tránsito peatonal. Determinación de la resistencia al deslizamiento por el método del péndulo de fricción. Ensayo en seco.

CTN 41/SC 11 DESLIZAMIENTO

UNE 7540:1998  UNE

Estado: Vigente / 2010-05-06

Mecánica de fractura. Terminología.

CTN 7 ENSAYOS DE MATERIALES

UNE 7220:2004  UNE

Estado: Vigente / 2010-05-06

Microfractografía de materiales metálicos. Terminología.

CTN 7 ENSAYOS DE MATERIALES

ISO/TTA 5:2007  ISO

Estado: Vigente / 2007-10-09

Code of practice for creep/fatigue testing of cracked components

ISO/TTA 2:1997  ISO

Estado: Vigente / 1997-04-17

Tensile tests for discontinuously reinforced metal matrix composites at ambient temperatures

DIN 51309:2020-09  DIN

Estado: Active / 2020-09

Materials testing machines - Calibration of static torque measuring devices / Note: Date of issue 2020-07-31*Intended as replacement for DIN 51309 (2005-12).

DIN 51308:2019-08  DIN

Estado: Active / 2019-08

Verification of auxiliary devices for application and measuring of forces in building - Clamp-devices, hydraulic cylinders, dynamometer for clamp aim

DIN EN ISO 6506-2:2019-03  DIN

Estado: Active / 2019-03

Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2017); German version EN ISO 6506-2:2018

DIN EN ISO 4545-3:2018-07  DIN

Estado: Active / 2018-07

Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017); German version EN ISO 4545-3:2018

DIN EN ISO 4545-2:2018-07  DIN

Estado: Active / 2018-07

Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2017); German version EN ISO 4545-2:2018

DIN 35227:2017-07  DIN

Estado: Active / 2017-07

Mechanical joining - Fatigue testing of mechanically joints

DIN EN ISO 7500-2:2007-04  DIN

Estado: Active / 2017-04

Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006); German version EN ISO 7500-2:2006

DIN 50100:2016-12  DIN

Estado: Active / 2016-12

Load controlled fatigue testing - Execution and evaluation of cyclic tests at constant load amplitudes on metallic specimens and components

DIN 51200:2016-08  DIN

Estado: Active / 2016-08

Materials testing machines - Design and application of holding devices for test pieces in hardness testing machines

DIN 51309:2005-12  DIN

Estado: Active / 2015-12

Materials testing machines - Calibration of static torque measuring devices / Note: To be replaced by DIN 51309 (in preparation).

DIN EN ISO 14577-2:2015-11  DIN

Estado: Active / 2015-11

Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015); German version EN ISO 14577-2:2015

DIN EN ISO 6506-3:2015-02  DIN

Estado: Active / 2015-02

Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014); German version EN ISO 6506-3:2014

DIN 51233:2014-10  DIN

Estado: Active / 2014-10

Material testing machines - Safety specifications - General specifications / Note: DIN 51233 (2007-04) remains valid alongside this standard until 2015-03-31.

DIN 51220:2003-08  DIN

Estado: Active / 2013-08

Materials testing machines - Generals for requirements and for verification and calibration of materials testing machines

DIN EN ISO 7500-1 Beiblatt 4:2013-03  DIN

Estado: Active / 2013-03

Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system; Supplement 4: Information for taking the uncertainty into account regarding the classification of material testing machines

DIN 51231-1:2001-12  DIN

Estado: Active / 2011-12

Material testing machines - Testing equipment for structural components - Part 1: Floor slabs

DIN 51302-2:2000-12  DIN

Estado: Active / 2010-12

Materials testing machines - Strain cylinder test method for compression testing machines for concrete

DIN EN ISO 7500-1 Beiblatt 2:1999-11  DIN

Estado: Active / 1999-11

Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of spring testing machines

DIN EN ISO 7500-1 Beiblatt 3:1999-11  DIN

Estado: Active / 1999-11

Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of fatigue testing machines / Note: To be replaced by DIN EN ISO 7500-1 Beiblatt 3 (2012-09).

DIN EN ISO 7500-1 Beiblatt 1:1999-11  DIN

Estado: Active / 1999-11

Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of tension, compression and flexion testing machines

DIN 876-2:1984-08  DIN

Estado: Active / 1984-08

Surface plates; cast iron surface plates, requirements and testing / Note: To be replaced by DIN 876-2 (2009-11).

DIN 876-1:1984-08  DIN

Estado: Active / 1984-08

Surface plates; natural hard rock surface plates; requirements and testing / Note: To be replaced by DIN 876-1 (2009-11).

BS 8607:2014+A1:2016  BSI

Estado: Definitive / 2018-02-14

Mechanically operated push button locksets. Requirements and test methods

BS ISO 14243-1:2009+A1:2020  BSI

Estado: Under Review / 2020-01-14

Implants for surgery. Wear of total knee-joint prostheses. Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test

19/30379034 DC  BSI

Estado: Definitive / 2019-01-03

BS ISO 6070. Auxiliary tables for vibration generators. Methods of describing equipment characteristics

BS 7976-1:2002+A1:2013  BSI

Estado: Confirmed / 2013-04-30

Pendulum testers. Specification

BS 7976-3:2002+A1:2013  BSI

Estado: Confirmed / 2013-04-30

Pendulum testers. Method of calibration

BS 7976-2:2002+A1:2013  BSI

Estado: Confirmed / 2013-04-30

Pendulum testers. Method of operation

BS ISO 8568:2007  BSI

Estado: Under Review / 2008-01-31

Mechanical shock. Testing machines. Characteristics and performance

BS 6140-2:1982, ISO 6070:1981  BSI

Estado: Revision Underway / 2007-06-29

Test equipment for generating vibration.. Methods of describing characteristics of auxiliary tables for test equipment for generating vibration

BS 8422:2003  BSI

Estado: Under Review / 2003-10-31

Force measurement. Strain gauge load cell systems. Calibration method

BS 6888:1988  BSI

Estado: Confirmed / 1988-09-30

Methods for calibration of bonded electrical resistance strain gauges

BS 6841:1987  BSI

Estado: Under Review / 1987-09-30

Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock

UNE-EN ISO 7500-1:2016  UNE

Estado: Anulada / 2018-05-16

Materiales metálicos. Calibración y verificación de máquinas de ensayos uniaxiales estáticos. Parte 1: Máquinas de ensayo de tracción/compresión. Calibración y verificación del sistema de medida de fuerza. (ISO 7500-1: 2015).

CTN 7 ENSAYOS DE MATERIALES

UNE 7450:1984  UNE

Estado: Anulada / 2000-02-24

METODO PARA LA DETERMINACION DEL FACTOR APARENTE DE ELASTICIDAD DE LOS SISTEMAS DE ENSAYO DE TRACCION (FACTOR K)

CTN 7 ENSAYOS DE MATERIALES

ISO/TTA 5:2006  ISO

Estado: Anulada / 2007-10-09

Code of practice for creep/fatigue testing of cracked components

DIN 51308:2005-10  DIN

Estado: Withdrawn / 2019-08

Verification of auxiliary devices for application and measuring of forces in building - clamp-devices, hydraulic cylinders, dynamometer for clamp aim

DIN 51308:2018-11  DIN

Estado: Withdrawn / 2019-08

Verification of auxiliary devices for application and measuring of forces in building - clamp-devices, hydraulic cylinders, dynamometer for clamp aim / Note: Date of issue 2018-10-05

DIN EN ISO 6506-2:2016-04  DIN

Estado: Withdrawn / 2019-03

Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO/DIS 6506-2:2016); German and English version prEN ISO 6506-2:2016 / Note: Date of issue 2016-03-25

DIN EN ISO 6506-2:2015-02  DIN

Estado: Withdrawn / 2019-03

Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014); German version EN ISO 6506-2:2014

DIN 51230:1977-12  DIN

Estado: Withdrawn / 2018-09

Material Testing Machines; Dynstat Apparatus for the Determination of Bending Strength and Impact Strength of Small Specimens

Número de resultados: 179

Lo más vendido

Normas
Libros