Para búsqueda de normas ISO, ASTM, IEC e IEEE, utilizar términos en inglés
Limpiar filtros Aplicar
Resultados para:
Número de resultados: 20.461
Estado: Vigente / 2017-06-15
Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 3: Photovoltaic modules and plants - Outdoor infrared thermography
Estado: Vigente / 2016-09-28
Photovoltaic (PV) arrays - Design requirements
Estado: Vigente / 2016-03-09
Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements
Estado: Vigente / 2018-08-29
Photovoltaic devices - Part 13: Electroluminescence of photovoltaic modules
Estado: Vigente / 2018-08-15
Ground-mounted photovoltaic power plants - Design guidelines and recommendations
Estado: Vigente / 2015-08-06
Photovoltaic (PV) modules - Test methods for the detection of potential-induced degradation - Part 1: Crystalline silicon
Estado: Vigente / 2018-04-18
Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems
Estado: Vigente / 2018-03-12
Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles
Estado: Vigente / 2017-02-07
Electric vehicle conductive charging system - Part 1: General requirements
Estado: Vigente / 2016-08-18
Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
Estado: Vigente / 2016-08-17
Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 2: Test procedures
Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
Estado: Vigente / 2009-07-30
Industrial communication networks - Network and system security - Part 3-1: Security technologies for industrial automation and control systems
Estado: Vigente / 2018-10-25
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
Estado: Vigente / 2018-10-05
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
Estado: Vigente / 2018-08-10
Failure modes and effects analysis (FMEA and FMECA)
Estado: Vigente / 2010-11-10
Industrial communication networks - Network and system security - Part 2-1: Establishing an industrial automation and control system security program
Estado: Vigente / 2018-05-28
Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements
Estado: Vigente / 2018-05-15
High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches
Estado: Vigente / 2018-02-28
Amendment 1 - Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
Estado: Vigente / 2017-08-31
Explosive atmospheres - Part 46: Equipment assemblies
Estado: Vigente / 2017-03-16
Amendment 1 - Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance
Estado: Vigente / 2017-03-03
Photovoltaic system performance - Part 1: Monitoring
Estado: Vigente / 2017-01-20
Instrument transformers - Part 100: Guidance for application of current transformers in power system protection
Estado: Vigente / 2016-12-16
Amendment 1 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
Estado: Vigente / 2016-05-10
Amendment 2 - Household and similar electrical appliances - Safety - Part 1: General requirements
Estado: Vigente / 2016-01-19
Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 1: Grid connected systems - Documentation, commissioning tests and inspection
Estado: Vigente / 2014-10-08
Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide
Estado: Vigente / 2014-02-20
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<i>U</i><sub>m</sub> = 1,2 kV) up to 30 kV (<i>U</i><sub>m</sub> = 36 kV) - Part 2: Cables for rated voltages from 6 kV (<i>U</i><sub>m</sub> = 7,2 kV) up to 30 kV (<i>U</i><sub>m</sub> = 36 kV)
Estado: Vigente / 2009-11-27
Risk management - Risk assessment techniques
Estado: Vigente / 2008-02-22
Safety of machinery - Application of protective equipment to detect the presence of persons
Estado: Vigente / 1980-01-01
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
Estado: Vigente / 1977-01-01
Dimensions of clevis and tongue couplings of string insulator units
Estado: Vigente / 2018-12-06
Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
Estado: Vigente / 2018-11-02
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
Estado: Vigente / 2018-10-04
Audio/video, information and communication technology equipment - Part 1: Safety requirements
Estado: Vigente / 2017-02-13
Design criteria of overhead transmission lines
Estado: Vigente / 2018-05-08
Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (U<sub>m</sub> = 1,2 kV) tested on non-insulated conductors
Estado: Vigente / 2018-03-28
Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide
Estado: Vigente / 2018-03-08
LED modules for general lighting - Safety specifications
Estado: Vigente / 2018-02-07
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
Estado: Vigente / 2018-01-26
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current "d16 A per phase)
Estado: Vigente / 2017-12-08
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
Estado: Vigente / 2017-10-26
Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
Estado: Vigente / 2017-08-24
Security for industrial automation and control systems - Part 2-4: Security program requirements for IACS service providers
Estado: Vigente / 2017-08-04
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
Estado: Vigente / 2017-07-28
Amendment 1 - Photovoltaic systems - Design qualification of solar trackers
Estado: Vigente / 2017-05-18
Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
Número de resultados: 20461
