Saltar navegación principal
Normas DIN – AENOR
DIN EN 13454-2/A1:2007-02

DIN EN 13454-2/A1:2007-02

Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods; German version EN 13454-2:2003/prA1:2006

Liants, liants composites et mélanges fabriqués en usine à base de sulfate de calcium pour chapes de sol - Partie 2: Méthodes d'essais; Version allemande EN 13454-2:2003/prA1:2006

Calciumsulfat-Binder, Calciumsulfat-Compositbinder und Calciumsulfat-Werkmörtel für Estriche - Teil 2: Prüfverfahren; Deutsche Fassung EN 13454-2:2003/prA1:2006

Fecha Anulación:
2017-11 /Withdrawn
Equivalencias internacionales:

EN 13454-2/prA1 (2006-12)

Relación con otras normas DIN:

Reemplazada por: DIN EN 13454-2:2007-11

Resumen:
In comparison with DIN EN 13454:2003-12 the following modification was carried out. In 4.4.2.1 the following paragraph is added after the second paragraph: For flowing mixtures for self levelling floor screeds the minimum flow diameter shall be 150 mm and the minimum amount of water shall be 225 ml. If the required flow diameter is not achieved the amount of water shall be increased.
Keywords:
Additives, Anhydrite, Anhydrite binders, Binding agents, Calcium, Calcium sulphate, Components, Construction, Construction materials, Factory mortars, Marking, Mortars, Nailed plank truss, pH, Properties, Reference methods, Screeds (floors), Setting time, Shrinkage, Shrinking, Soundness, Specification (approval), Strength of materials, Surveillance (approval), Swelling, Testing
20,75
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta