Saltar navegación principal
Normas DIN – AENOR
DIN 69893-1:2006-10

DIN 69893-1:2006-10

Hollow taper shanks with flange contact surface - Part 1: Hollow taper shanks type A and type C; Dimensions and design

Queues creuses coniques à surface de contact plane - Partie 1: Queues creuses coniques type A et type C; Dimensions et conception

Kegel-Hohlschäfte mit Plananlage - Teil 1: Kegel-Hohlschäfte Form A und Form C; Maße und Ausführung

Fecha Anulación:
2010-12 /Withdrawn
This standard specifies the dimensions for hollow taper shanks with flange contact surface (HSK) to be applied on machine tools (e. g. turning machines, drilling machines, milling machines and grinding machines). A range of shank sizes has been specified and two shank types were included. Type A incorporated a grooved flange to enable automatic tool exchange. The tools are also manually exchangeable. Type C has no groove in its flange and can only be manually exchanged. For both types, a bore in the taper shank has been provided for manual clamping. The torque is transmitted by the drive key notch at the tail end of the shank as well as by friction lock.
Automatic, Bills of exchange, Cones, Design, Designations, Dimensions, Exchangeable, Fixtures, Machine tools, Machines, Resilience, Shafts, Shape, Taper shanks, Tool exchanges, Tools, Torque, Tubular fasteners
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta