Saltar navegación principal
Normas DIN – AENOR
DIN ISO 6162-1:2006-02

DIN ISO 6162-1:2006-02

Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002 + Cor. 1:2004)

Transmissions hydrauliques - Raccordements à bride avec demi-brides ou bride monobloc et vis métriques ou en inches - Partie 1: Raccordements à bride pour utilisation à des pressions de 3,5 MPa (35 bar) à 35 MPa (350 bar), DN 13 à DN 127 (ISO 6162-1:2002 + Cor. 1:2004)

Fluidtechnik - Flanschverbindungen mit einteiligen oder geteilten Flanschen und metrischen Schrauben oder Inch-Schrauben - Teil 1: Flanschverbindungen für Drücke von 3,5 MPa (35 bar) bis 35 MPa (350 bar), DN 13 bis DN 127 (ISO 6162-1:2002 + Cor. 1:2004)

Fecha Anulación:
2014-01 /Withdrawn
Equivalencias internacionales:

ISO 6162-1 Technical Corrigendum 1 (2004-11)

ISO 6162-1 (2002-12)

Relación con otras normas DIN:

Reemplaza a: DIN ISO 6162-1:2004-12

Resumen:
This part of ISO 6162 gives complete general and dimensional specifications for flange heads, split flange clamps (FCS), one-piece flange clamps (FC) and ports applicable to four-screw, split and one-piece flange clamp type tube and hose connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar). This part of ISO 6162 also specifies the dimensions of the seals to be used, as well as the grooves to house the seal. It also recognizes the need to accommodate metric (type 1) screw fasteners, as well as to provide a means to use existing inch (type 2) screw fasteners.
Keywords:
All-flanged crosses, Compression fittings, Dimensional tolerances, Dimensions, Flange connections, Flanges, Fluid technology, Gaskets, Hose connections, Hydraulic equipment, Hydraulic fluid power, Hydraulic systems, Hydraulic transmission systems, Inch, Marking, Materials, Mechanical engineering, Metric, One-piece, Pipe couplings, Screws (bolts), Specifications, Split, Strength class, Strength of materials, Tolerances (measurement)
65,98
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta