Saltar navegación principal
Normas DIN – AENOR
DIN EN 15100-1:2005-02

DIN EN 15100-1:2005-02

Thermal insulating products for buildings - In-situ formed urea-formaldehyde foam (UF) products - Part 1: Specification for the foam system before installation; German version prEN 15100-1:2004

Produits isolants thermiques pour le bàtiment - Isolation formée en place à base de mousse de formaldéhyde (UF) - Partie 1: Spécification du système de mousse avant la mise en place; Version allemande prEN 15100-1:2004

Wärmedämmstoffe für Gebäude - An der Verwendungsstelle hergestellte Wärmedämmung aus Harnstoff-Formaldehydharz-Schaum (UF) - Teil 1: Spezifikation für das Schaumsystem vor dem Einbau; Deutsche Fassung prEN 15100-1:2004

Fecha Anulación:
2018-02 /Withdrawn
Equivalencias internacionales:

prEN 15100-1 (2004-11)

This document specifies requirements for in-situ formed urea formaldehyde foam (UF) products when installed in external walls, internal walls, partitions, floors and roofs. Products covered by this standard may also be used for acoustic applications. This document is a specification for the rigid foam dispensing system before installation. This document describes the product characteristics and includes procedures for testing, marking and labelling and the rules for evaluation of conformity. This document does not specify the required level of all properties that should be achieved by a product to demonstrate fitness for purpose in a particular application. The required levels are to be found in regulations or non-conflicting standards. UF products with a declared thermal conductivity at 10 °C (mean temperature) greater than 0,050 W/(mK) are not covered by this document. This document does not cover factory made products utilising urea formaldehyde foam intended to be used for the insulation of buildings or for the insulation of building equipment and industrial installations. This document does not specify all the requirements for the raw materials or the performance requirements for loadbearing applications.
Buildings, Components, Conformity, Conformity assessment, Construction, Definitions, Design, Evaluations, Foamed insulating material, Foamed plastics, In situ, In-situ cellular plastics, Insulations, Labelling, Marking, Methods of manufacture, Properties, Quality, Resins, Specification (approval), Sprayed foam products, Testing, Thermal conductivity, Thermal insulating materials, Thermal insulation, Thermal protection, Thermal resistance, Urea, Urea formaldehyde, Urea-formaldehyde resins
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta