Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 13000-1:2020-08

DIN EN ISO 13000-1:2020-08

Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO/DIS 13000-1:2020); German and English version prEN ISO 13000-1:2020 / Note: Date of issue 2020-07-03*Intended as replacement for DIN EN ISO 13000-1 (2006-02).

Plastiques - Semi-produits en polytétrafluoroéthylène (PTFE) - Partie 1: Spécifications et désignation (ISO/DIS 13000-1:2020); Version allemande et anglaise prEN ISO 13000-1:2020 / Attention: Date de parution 2020-07-03*Prévu pour remplacer DIN EN ISO 13000-1 (2006-02).

Kunststoffe - Polytetrafluorethylen (PTFE)-Halbzeuge - Teil 1: Anforderungen und Bezeichnung (ISO/DIS 13000-1:2020); Deutsche und Englische Fassung prEN ISO 13000-1:2020 / Achtung: Erscheinungsdatum 2020-07-03*Vorgesehen als Ersatz für DIN EN ISO 13000-1 (2006-02).

Fecha:
2020-08 /Active
Equivalencias internacionales:

ISO/DIS 13000-1 (2020-07)

prEN ISO 13000-1 (2020-07)

Resumen:
This part of ISO 13000 specifies the requirements and establishes a system of designation for processed unfilled polytetrafluoroethylene (PTFE) products, which may occur in several forms. The PTFE used to make the semi-finished product is described in ISO 20568 1 and, as provided in ISO 20568 1, may contain up to 1 % of a comonomer. The PTFE used to make the semi-finished product may be virgin, reprocessed or recycled resin. The addition of up to 1,5 % by mass of pigment or colorant is permitted. This part of ISO 13000 allows for five grades based on tensile strength and elongation at break. The semi-finished products can be as-processed (type P) or dimensionally stabilized (type S) and may also have specified electrical properties or other properties when they are required for an application.
Keywords:
Breakdown voltage, Codes, Definitions, Designations, Dimensions, Electric strength, Elongation at fracture, Plastics, Polytetrafluoroethylene, Properties, PTFE, Semi-finished products, Specification, Specification (approval), Tensile strength
65,98
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta