Saltar navegación principal
Normas DIN – AENOR
DIN EN 1253-7:2020-08

DIN EN 1253-7:2020-08

Gullies for buildings - Part 7: Trapped floor gullies with mechanical closure; German and English version prEN 1253-7:2020 / Note: Date of issue 2020-07-17

Avaloirs et siphons pour bâtiments - Partie 7: Siphons de sol avec système d'obturation mécanique; Version allemande et anglaise prEN 1253-7:2020 / Attention: Date de parution 2020-07-17

Abläufe für Gebäude - Teil 7: Bodenabläufe mit mechanischem Geruchverschluss; Deutsche und Englische Fassung prEN 1253-7:2020 / Achtung: Erscheinungsdatum 2020-07-17

2020-08 /Active
Equivalencias internacionales:

prEN 1253-7 (2020-07)

This Document classifies floor gullies for use inside buildings, gives guidance for places of installation and specifies requirements for the construction, design, performance and marking of factory made gullies for buildings, irrespective of the material, for use in drainage systems requiring a trap with a mechanical closure (referred to as floor gullies).Note: Floor gullies with a mechanical closure are not covered by Part 1, Part 6, Part 8.These products are intended to be installed where:- the building does not exceed a ground-floor and three floors above;- infrequent use could result in a water seal evaporating.
Building drainage, Buildings, Covers, Definitions, Density, Drainage, Floor drains, Gullies, Marking, Materials, Mechanic, Mechanical strength, Mounting location, Odours, Openings, Sewage engineering, Specification (approval), Traps (drainage), Waste-water drainage, Watertightness
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta