Saltar navegación principal
Normas DIN – AENOR
DIN EN 17501:2020-05

DIN EN 17501:2020-05

Non-destructive testing - Thermographic testing - Active thermography with laser excitation; German and English version prEN 17501:2020 / Note: Date of issue 2020-04-17

Essais non destructifs - Analyse thermographique; Version allemande et anglaise prEN 17501:2020 / Attention: Date de parution 2020-04-17

Zerstörungsfreie Prüfung - Thermografische Prüfung - Aktive Thermografie mit Laser-Anregung; Deutsche und Englische Fassung prEN 17501:2020 / Achtung: Erscheinungsdatum 2020-04-17

2020-05 /Active
Equivalencias internacionales:

prEN 17501 (2020-05)

This standard determines the guidelines and the specifications for non-destructive testing using active thermography with laser excitation.Active thermography with laser excitation is mainly applicable, but not limited to different materials (e. g. composites, metals, ceramics) and to:- the detection of surface-breaking discontinuities, particularly cracks,- the detection of discontinuities located just below the surface or below coatings with an efficiency that diminishes rapidly with a few mm depth,- the detection of disbonds and delamination parallel to the examined surface,- the measurement of thermophysical material properties, like thermal diffusivity.The requirements for the equipment, for the verification of the system, for the surface condition of the part to be tested, for the scanning conditions, for the recording, the processing and the interpretation of the results are specified. Acceptance criteria are not defined.Active thermography with laser excitation can be applied in industrial production as well as in maintenance and repair (vehicle parts, engine parts, power plant, aerospace, etc).
Active, Definitions, Excitations, Finishes, Lasers, Materials, Materials testing, Measuring instruments, Non-destructive testing, Scanning, Testing, Thermography
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta