Saltar navegación principal
Normas DIN – AENOR
DIN 14461-3:2020-08

DIN 14461-3:2020-08

Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16

Équipement de branchement de tuyaux pour la lutte contre l'incendie - Partie 3: Robinets pour tuyaux PN 16

Feuerlösch-Schlauchanschlusseinrichtungen - Teil 3: Schlauchanschlussventile PN 16

2020-08 /Active
Relación con otras normas DIN:

Reemplaza a: DIN 14461-3/A1:2019-09

Reemplaza a: DIN 14461-3:2016-10

This document specifies requirements for fire hose valves that are used to connect wall hydrant and other types of hose connection points to fire hose reel systems in accordance with DIN 14462: size 1: for wall hydrants with semi-rigid hose according to DIN 14461-1 - type S; size 2: for wall hydrants with semi-rigid hose according to DIN 14461-1 - type F, wall hydrants with flat hose in accordance with DIN 14461-6 or other type of a hose connection to a water supply line; size 2,5: special size as hose connection point to a water supply line. Fire hose valves according to this standard are provided for connection to fire water systems according to DIN 14462. According to DIN 14462 and DIN 1988-600 only valves of size 1 and equipped with a safety combination in accordance with 5.2 of this standard, shall be used also for direct connection of wall hydrants type S to the potable water supply. Note: Requirements and further provisions are contained in DIN 1988-600. Fire hose valves with limit switches (e. g. micro end switches) are used to obtain signal message when operating a valve. They are commonly used for the initiation of filling and draining devices in accordance with DIN 14463-1 in fire extinguishing pipe systems "wet/dry" and for the control of pressure boosting systems for extinguishing water pipes "wet ". This document contains amendments to the various versions of the assembly screw fitting which have been newly defined in the October 2016 edition. The amendment allows the use of screw fittings fitting, as was previously customary in DIN 14461-5, if fire hose valves are constructed by using an assembly screw fitting as a separate component.
Connections, Connectors, Design, Designations, Dimensions, Fire brigade, Fire extinguishing equipment, Fire hydrants, Firefighting, Flexible pipes, Hose connection equipment, Hose connectors, Hoses, Hydrants, Internal threads, Inventories, Limit switches, Marking, Materials, Qualification tests, Specification (approval), Testing, Valves
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta