Saltar navegación principal
Normas DIN – AENOR
DIN EN 12101-13:2020-08

DIN EN 12101-13:2020-08

Smoke and heat control systems - Part 13: Pressure differential systems (PDS) - Design and calculation methods, acceptance testing, maintenance and routine testing of installation; German and English version prEN 12101-13:2020 / Note: Date of issue 2020-07-17

Systèmes pour le contrôle des fumées et de la chaleur - Partie 13: Système de pression différentielle (PDS) - Méthodes de concept et de calculs, installation, tests de réception, tests périodiques et maintenance; Version allemande et anglaise prEN 12101-13:2020 / Attention: Date de parution 2020-07-17

Rauch- und Wärmefreihaltung - Teil 13: Differenzdrucksysteme - Rauchschutz-Druckanlagen (RDA) - Planung, Bemessung, Einbau, Abnahmeprüfung, Funktions-Tests, Betrieb und Instandhaltung; Deutsche und Englische Fassung prEN 12101-13:2020 / Achtung: Erscheinungsdatum 2020-07-17

2020-08 /Active
Equivalencias internacionales:

prEN 12101-13 (2020-07)

This standard gives guidance and requirements for the design and calculation methods, installation, acceptance testing, routine testing and maintenance for pressure differential systems (PDS).PDS are designed to hold back smoke at a leaky physical barrier in a building, such as a door (either open or closed) or other similarly restricted openings and to keep tenable conditions in escape and access routes depending on the application.It covers systems intended to protect means of escape e. g. staircases, corridors, lobbies, as well as systems intended to provide a protected firefighting bridgehead for the Fire Services.It provides details on the critical features and relevant procedures for the installation.It describes the commissioning procedures and acceptance testing criteria required to confirm that the calculated design is achieved in the building.This standard gives complete rules, requirements and procedures to design PDS for buildings up to 60 m.For buildings taller than 60 m the same requirements are given (e. g. Table 5.1), but additional calculation and verification methods are necessary. Requirements for such methods and verification are given in Annex D, but the methods fall outside the scope of this standard (e. g. Computational Fluid Dynamics (CFD)).Routine testing and maintenance requirements are also defined in the standard.In absence of national requirements and under expected ambient and outside conditions, the requirements in Table 5.1 shall be fulfilled for PDS.
Acceptance inspection, Assembling kits, CE marking, Chimney flue, Construction, Definitions, Differential pressure, Differential pressures, Dimensioning, Discharges, Efficiency, Elimination of smoke, Fire safety, Fire safety in buildings, Fire spread prevention, Fire technology, Firefighting, Functions, Heat control, Heat flow, Heat outlet systems, Installations, Maintenance, Mechanical, Mounting, Operation, Performance, Planning, Reliability, Safety devices, Safety engineering, Security systems in buildings, Smoke, Smoke curtains, Smoke extraction (buildings), Smoke funnel, Smoke protection, Smokeless zones, Specification (approval), Stress, Structural fire protection, Testing, Thermal protection, Types
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta