Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 3691-2/A2:2019-09

DIN EN ISO 3691-2/A2:2019-09

Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks - Amendment 2 (ISO 3691-2:2016/DAM 2:2019); German and English version EN ISO 3691-2:2016/prA2:2019 / Note: Date of issue 2019-08-09*Intended as an amendment to DIN EN ISO 3691-2 (2017-02).

Chariots de manutention - Exigences de sécurité et vérification - Partie 2: Chariots automoteurs à portée variable - Amendement 2 (ISO 3691-2:2016/DAM 2:2019); Version allemande et anglaise EN ISO 3691-2:2016/prA2:2019 / Attention: Date de parution 2019-08-09*Prévu comme amendement à DIN EN ISO 3691-2 (2017-02).

Flurförderzeuge - Sicherheitsanforderungen und Verifizierung - Teil 2: Motorkraftbetriebene Flurförderzeuge mit veränderlicher Reichweite - Änderung 2 (ISO 3691-2:2016/DAM 2:2019); Deutsche und Englische Fassung EN ISO 3691-2:2016/prA2:2019 / Achtung: Erscheinungsdatum 2019-08-09*Vorgesehen als Änderung von DIN EN ISO 3691-2 (2017-02).

2019-09 /Active
Equivalencias internacionales:

EN ISO 3691-2/prA2 (2019-08)

ISO 3691-2 DAM 2 (2019-08)

This part of ISO 3691 gives safety requirements and the means for their verification for self-propelled industrial variable-reach trucks and variable-reach container handlers/reach stackers as defined in ISO 5053-1 (hereafter referred to as trucks), equipped with forks or integral load-handling devices for normal industrial duties (e. g. fork arms or means, such as spreaders, for handling containers). It is not applicable to - rough-terrain variable-reach trucks, - rough-terrain variable-reach trucks for handling containers, - machines designed primarily for earth-moving (e. g. loaders and dozers), even when their buckets and blades are replaced with forks, - machines from which the load can swing freely in all directions. For the purposes of this part of ISO 3691, fork arms and integrated attachments are considered to be a part of the truck, whereas attachments/equipment mounted on the load carrier or on the fork arms which are removable by the user are not. Nevertheless, requirements for such attachments are also given by the document. Any regional requirements additional to the provisions of this part of ISO 3691 are addressed in ISO/TS 3691-7 and ISO/TS 3691-8. This part of ISO 3691 deals with all significant hazards, hazardous situations or hazardous events, as listed in Annex B, with the exception of the following, relevant to the applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. It does not establish requirements for hazards that can occur - during construction, - when using trucks on public roads, - when operating in potentially explosive atmospheres, or - when lifting persons
Components, Connecting dimensions, Dimensions, Driver-controlled fork truck, Electrical engineering, Elevating trucks, Equipment safety, Fork arms, Fork carriers, Fork trucks, Hazards, Industrial tractors, Industrial truck, Industrial trucks, Inspection, Lift trucks, Lifting equipment, Lifting hights, Lifting tackle, Load capacity, Machines, Maintenance, Marking, Materials handling equipment, Mechanical engineering, Mounted implements, Occupational safety, Operating instructions, Operator places, Power drives, Powered industrial trucks, Reach fork truck, Restraint systems (protective), Safety, Safety devices, Safety engineering, Safety markings, Safety of products, Safety requirements, Specification (approval), Stacking machines, Stacking vehicle, Testing, Tolerances (measurement), Tractors, User information, Vehicle components, Working range, Workplace safety
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta