Saltar navegación principal
Normas DIN – AENOR
DIN 3996:2019-09

DIN 3996:2019-09

Calculation of load capacity of cylindrical worm gear pairs with rectangular crossing axes

Calcul de la capacité de charge des engrenages à vis cylindriques à axes orthogonaux

Tragfähigkeitsberechnung von Zylinder-Schneckengetrieben mit sich rechtwinklig kreuzenden Achsen

2019-09 /Active
Relación con otras normas DIN:

Reemplaza a: DIN 3996:2018-09

Reemplaza a: DIN 3996:2012-09

By this standard the load capacity of cylindrical worm gear drives can be calculated. This standard takes into account the load capacity limits wear, pitting, tooth breakage, worm deflection and temperature. The calculation method for wear is based on the fact, that the wear intensity of a material / lubricant combination is a function of the lubricant film thickness and the lubricant structure. The main influence parameter on pitting resistance is the Hertzian stress. For tooth root strength the calculation method is based on a nominal shear stress, the worm deflection on the deflection curve of a cylindrical shaft
Base cylinders, Calculation of load capacity, Centre distances, Cylindrical worm gears, Deflection, Efficiency, Gear boxes, Load capacity, Lubricants, Materials, Mathematical calculations, Mechanical engineering, Pitting load capacity, Rectangular, Shaft angles, Stray power, Temperature, Terms, Tooth bottom load capacity, Tooth breakages, Wear, Worm angers, Worm gears
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta