Saltar navegación principal
Normas DIN – AENOR
DIN EN 378-3/A1:2019-10

DIN EN 378-3/A1:2019-10

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection; German and English version EN 378-3:2016/prA1:2019 / Note: Date of issue 2019-09-06

Systèmes frigorifiques et pompes à chaleur - Exigences de sécurité et d'environnement - Partie 3: Installation in situ et protection des personnes; Version allemande et anglaise EN 378-3:2016/prA1:2019 / Attention: Date de parution 2019-09-06

Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen - Teil 3: Aufstellungsort und Schutz von Personen; Deutsche und Englische Fassung EN 378-3:2016/prA1:2019 / Achtung: Erscheinungsdatum 2019-09-06

Fecha Anulación:
2020-12 /Withdrawn
Equivalencias internacionales:

EN 378-3/prA1 (2019-09)

Relación con otras normas DIN:

Reemplazada por: DIN EN 378-3:2020-12

This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants. The term "refrigerating system" used in this European Standard includes heat pumps. This Part 3 of the European Standard is applicable to the installation site (plant space and services). It specifies requirements on the site for safety, which may be needed because of, but not directly connected with, the refrigerating system and its ancillary components. This standard applies: a) to refrigerating systems, stationary or mobile, of all sizes except to vehicle air conditioning systems covered by a specific product standard e. g. ISO 13043; b) to secondary cooling or heating systems; c) to the location of the refrigerating systems; d) to replaced parts and added components after adoption of this standard if they are not identical in function and in the capacity. Systems using refrigerants other than those listed in of FprEN 378-1:2016, Annex E are not covered by this standard. This standard does not apply to goods in storage. This standard is not applicable to refrigerating systems which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication. This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site. This standard also applies in the case of the conversion of a system for another refrigerant type, in which case conformity with the relevant clauses of parts 1 to 4 of the standard shall be assessed.
Accident prevention, Alarm devices, Ammonia, Classification, Cleaning, Closed, Cold rooms, Combustible, Compactors, Conduits, Constructions, Control, Cooling systems, Corrosion protection, Design, Detectors (circuits), Electrical equipment, Electrically-operated devices, Emergency shutdown, Emergency-off, Enclosures, Environmental requirements, Equipment, Evacuations, Excess pressures, Explosion hazard, Explosion protection, Fire safety, Gas alarm, Gases, Heat pumps, Indications, Installation locations, Installations, Insulations, Laying, Liquid levels, Machine rooms, Maintenance, Marking, Occupational safety, Openings, Operation, Ozone, Pipelines, Plant, Pollution control, Position, Pressure, Pressure vessels, Protection, Protection of persons, Protective clothing, Pumps, Put out of action, Refrigerants, Refrigerating plant, Refrigerating plants, Refrigeration, Safety, Safety engineering, Safety requirements, Shut-off valves, Specification (approval), Switch cabinets, Temperature, Testing, Valves, Ventilation, Warning system, Waters, Workplace safety
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta