Saltar navegación principal
Normas DIN – AENOR
DIN EN 60061-3:2019-06

DIN EN 60061-3:2019-06

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + supplements A:1970 to U:1997 + A20:1998 to A55:2018, modified); German version EN 60061-3:1993 + A1:1995 to A7:1997 + A20:1998 to A55:2018 / Note: Loose-leaf publication*DIN EN 60061-3 (2018-09) remains valid alongside this standard until 2021-09-27.*A transition period, as set out in DIN EN 60061-3 (2020-07), exists until 2022-08-12.

Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 3: Calibres (IEC 60061-3:1969 + compléments A:1970 à U:1997 + A20:1998 à A55:2018, modifiée); Version allemande EN 60061-3:1993 + A1:1995 à A7:1997 + A20:1998 à A55:2018 / Attention: Recueil à feuilles mobiles*DIN EN 60061-3 (2018-09) reste valable avec la présente norme jusqu'à 2021-09-27.*Il existe un délai de transition comme fixé en DIN EN 60061-3 (2020-07) jusqu'à 2022-08-12.

Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 3: Lehren (IEC 60061-3:1969 + Ergänzungen A:1970 bis U:1997 + A20:1998 bis A55:2018, modifiziert); Deutsche Fassung EN 60061-3:1993 + A1:1995 bis A7:1997 + A20:1998 bis A55:2018 / Achtung: Loseblattsammlung*Daneben gilt DIN EN 60061-3 (2018-09) noch bis 2021-09-27.*Übergangsfrist, festgelegt durch DIN EN 60061-3 (2020-07), bis 2022-08-12 beachten.

Fecha Anulación:
2020-07 /Withdrawn
Equivalencias internacionales:

EN 60061-3 (1993-03)

EN 60061-3/A1 (1995-01)

EN 60061-3/A2 (1995-12)

EN 60061-3/A20 (1998-04)

EN 60061-3/A21 (1999-04)

EN 60061-3/A22 (1999-09)

EN 60061-3/A23 (2000-11)

EN 60061-3/A24 (2001-04)

EN 60061-3/A25 (2001-04)

EN 60061-3/A26 (2001-11)

EN 60061-3/A27 (2002-06)

EN 60061-3/A28 (2002-06)

EN 60061-3/A29 (2002-11)

EN 60061-3/A3 (1995-12)

EN 60061-3/A30 (2003-06)

EN 60061-3/A31 (2003-10)

EN 60061-3/A32 (2003-12)

EN 60061-3/A33 (2004-09)

EN 60061-3/A34 (2005-01)

EN 60061-3/A35 (2005-11)

EN 60061-3/A36 (2006-09)

EN 60061-3/A37 (2007-03)

EN 60061-3/A38 (2007-05)

EN 60061-3/A39 (2009-06)

EN 60061-3/A4 (1996-03)

EN 60061-3/A40 (2009-10)

EN 60061-3/A41 (2010-10)

EN 60061-3/A42 (2010-10)

EN 60061-3/A43 (2011-11)

EN 60061-3/A44 (2011-11)

EN 60061-3/A45 (2012-02)

EN 60061-3/A46 (2012-11)

EN 60061-3/A47 (2013-05)

EN 60061-3/A48 (2014-05)

EN 60061-3/A49 (2015-05)

EN 60061-3/A5 (1996-08)

EN 60061-3/A50 (2015-10)

EN 60061-3/A51 (2015-12)

EN 60061-3/A52 (2016-09)

EN 60061-3/A53 (2017-07)

EN 60061-3/A54 (2018-03)

EN 60061-3/A55 (2018-11)

EN 60061-3/A6 (1996-12)

EN 60061-3/A7 (1997-05)

Relación con otras normas DIN:

Reemplaza a: DIN EN 60061-3:2018-09

Reemplazada por: DIN EN 60061-3:2020-07

Reemplaza a: DIN EN 60061-3/A55:2018-01

Resumen:
This standard contains Amendment 55 to IEC 60061-3, which covers the following standard sheets and systems: 7006-186 and 7006-186A to 7006-186G for system GH36d.
Diese Norm enthält die 55. Änderung zu IEC 60061-3, die die folgenden Datenblätter und Systeme betreffen: 7006-186 und 7006-186A bis 7006-186G zu System GH36d.
Keywords:
Applications, Automobiles, Bayonet lamp caps, Blank forms, Candle lamps, Candle shape, Cap gauges, Cap sleeves, Capacitive loads, CE marking, Checks, Clamps, Classification, Clearances, Cones, Connections, Connectors, Contact, Contact piece, Contact pins, Contact safety devices, Coordination, Creepage distances, Current flow, Current supply, Design, Designation systems, Designations, Detail specification, Dielectric strength, Dimensioning, Dimensions, Earthing conductor terminations, Edison screw threads, Electric contact protection, Electric contacts, Electric lamps, Electrical components, Electrical engineering, Electrical resistance, Electrical safety, Electronic equipment and components, Film resistors, Fire resistance, Fits, Fittings, Fixed film resistors, Fixed resistors, Fluorescent lamps, Force measurement, Gauges, General lighting service lamps, Go-gauges, Guide books, Holding devices, IEC, IEC cap gauges, IEC gauges, IEC holder gauges, IEC lamp caps, IEC lampholders, Illuminating engineering, Illumination engineering, Incandescent lamps, Information, Inscription, Insertion force, Inspection, Insulating resistance, Insulations, Insulator bodies, Interchangeability, International, Lamp caps, Lampholder gauges, Lampholders, Lamps, Leakage paths, Lighting plants, Lighting systems, Limit deviations, Loose-leaf manuals, Low power methods, Luminaires, Marking, Measuring instruments, Mechanical properties, Metal films, Minimum retention force, Mining, Moisture resistance, Motor vehicles, Motor-car lamps, Non-interchangeability, Non-wirewound resistors, Not-go gauges, Order indications, Packages, P-caps, Pin lamp caps, Plinths, Protection against electric shocks, Qualification tests, Quality assessment procedures, Quality assessment systems, Rating, Ratings, Recording, Replaceability, Resistors, Retention force, Right-hand screw threads, Road vehicles, Routine tests, Safety, Safety engineering, Screw lamp caps, Service voltage, Sheathings, Small lamps, Sockets, Specification (approval), Stability, Strength of materials, Symbols, Technical data sheets, Tension crack corrosion, Testing, Testing requirements, Thermal stability, Threads, Tolerances (measurement), Tracking index, Tracking resistance, Tubular lamps, Tungsten-halogen lamps, Use, Vehicle lights, Withdrawal force
409,44
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta