Saltar navegación principal
Normas DIN – AENOR
DIN 4753-1:2019-05

DIN 4753-1:2019-05

Water heaters, water heating installations and storage water heaters for drinking water - Part 1: Tanks with a capacity of over 2 000 l

Chauffe-eau, installations de chauffe-eau pour eau potable et réservoir-chauffe-eau pour eau potable - Partie 1: Réservoirs d'une capacité supérieure à 2 000 l

Trinkwassererwärmer, Trinkwassererwärmungsanlagen und Speicher-Trinkwassererwärmer - Teil 1: Behälter mit einem Volumen über 2 000 l

Fecha:
2019-05 /Active
Relación con otras normas DIN:

Reemplaza a: DIN 4753-1:2018-10

Reemplaza a: DIN 4753-1:2011-11

Resumen:
This standard specifies performance requirements and testing as well as requirements for thermal insulation, corrosion protection and manufacturing for unvented (closed) storage water heaters for drinking water with a capacity of over 2000 l, to be connected to water supply systems having an allowable operating pressure between 0,05 MPa and 1,0 MPa (0,5 bar and 10 bar). They shall be fitted with control- and safety devices which shall be dimensioned so that the allowable operating temperature of the stored drinking water does not exceed 95 °C. This standard only applies to storage water heaters and storage water heater systems, where the formation of air or vapor of more than 5 l is safely prevented.
Keywords:
Acceptance inspection, Closed, Containers, Corrosion protection, Definitions, Drinking water, Equipment, Heat exchangers, Heaters, Hygiene, Inspection, Marking, Materials, Non ventilated, Performance requirements, Potable water, Production, Qualification tests, Safety engineering, Service water, Specification (approval), Storage water heaters, Tanks, Temperature indicator, Testing, Thermal environment systems, Thermal insulation, Warm water supply, Water heaters, Water heating installations, Water supply
53,93
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta