Saltar navegación principal
Normas DIN – AENOR
DIN EN 60061-3:2018-09

DIN EN 60061-3:2018-09

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + supplements A:1970 to U:1997 + A20:1998 to A53:2017 + A54:2017, modified); German version EN 60061-3:1993 + A1:1995 to A7:1997 + A20:1998 to A53:2017 + A54:2018 / Note: Loose-leaf publication*DIN EN 60061-3 (2017-10) remains valid alongside this standard until 2021-01-19.*A transition period, as set out in DIN EN 60061-3 (2019-06), exists until 2021-09-27.

Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 3: Calibres (IEC 60061-3:1969 + compléments A:1970 à U:1997 + A20:1998 à A53:2017 + A54:2017, modifiée); Version allemande EN 60061-3:1993 + A1:1995 à A7:1997 + A20:1998 à A53:2017 + A54:2018 / Attention: Recueil à feuilles mobiles*DIN EN 60061-3 (2017-10) reste valable avec la présente norme jusqu'à 2021-01-19.*Il existe un délai de transition comme fixé en DIN EN 60061-3 (2019-06) jusqu'à 2021-09-27.

Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 3: Lehren (IEC 60061-3:1969 + Ergänzungen A:1970 bis U:1997 + A20:1998 bis A53:2017 + A54:2017, modifiziert); Deutsche Fassung EN 60061-3:1993 + A1:1995 bis A7:1997 + A20:1998 bis A53:2017 + A54:2018 / Achtung: Loseblattsammlung*Daneben gilt DIN EN 60061-3 (2017-10) noch bis 2021-01-19.*Übergangsfrist, festgelegt durch DIN EN 60061-3 (2019-06), bis 2021-09-27 beachten.

Fecha Anulación:
2019-06 /Withdrawn
Equivalencias internacionales:

EN 60061-3 (1993-03)

EN 60061-3/A1 (1995-01)

EN 60061-3/A2 (1995-12)

EN 60061-3/A20 (1998-04)

EN 60061-3/A21 (1999-04)

EN 60061-3/A22 (1999-09)

EN 60061-3/A23 (2000-11)

EN 60061-3/A24 (2001-04)

EN 60061-3/A25 (2001-04)

EN 60061-3/A26 (2001-11)

EN 60061-3/A27 (2002-06)

EN 60061-3/A28 (2002-06)

EN 60061-3/A29 (2002-11)

EN 60061-3/A3 (1995-12)

EN 60061-3/A30 (2003-06)

EN 60061-3/A31 (2003-10)

EN 60061-3/A32 (2003-12)

EN 60061-3/A33 (2004-09)

EN 60061-3/A34 (2005-01)

EN 60061-3/A35 (2005-11)

EN 60061-3/A36 (2006-09)

EN 60061-3/A37 (2007-03)

EN 60061-3/A38 (2007-05)

EN 60061-3/A39 (2009-06)

EN 60061-3/A4 (1996-03)

EN 60061-3/A40 (2009-10)

EN 60061-3/A41 (2010-10)

EN 60061-3/A42 (2010-10)

EN 60061-3/A43 (2011-11)

EN 60061-3/A44 (2011-11)

EN 60061-3/A45 (2012-02)

EN 60061-3/A46 (2012-11)

EN 60061-3/A47 (2013-05)

EN 60061-3/A48 (2014-05)

EN 60061-3/A49 (2015-05)

EN 60061-3/A5 (1996-08)

EN 60061-3/A50 (2015-10)

EN 60061-3/A51 (2015-12)

EN 60061-3/A52 (2016-09)

EN 60061-3/A53 (2017-07)

EN 60061-3/A54 (2018-03)

EN 60061-3/A6 (1996-12)

EN 60061-3/A7 (1997-05)

Relación con otras normas DIN:
Resumen:
This draft contains Amendment 53 and 54 to EN 60061-3, which covers the following standard sheets and systems: 7006-122 for system G8.5, 7006-163A to -163D for System PGZ18 und PGZX18, 7006-175, -175A to -175E for System GUZ5.3, 7006-183, 183B and -183C for System GX16t-5 und 7006-187, -187A to -187L for System GR6d.
Diese Ausgabe enthält die 53. und 54. Änderung zu IEC 60061-3, die die folgenden Datenblätter und Systeme betreffen: 7006-122E zu System G8.5, 7006-163A bis -163D zu System PGZ18 und PGZX18, 7006-175, -175A bis -175E zu System GUZ5.3, 7006-183, 183B und -183C zu System GX16t-5 und 7006-187, -187A bis -187L zu System GR6d.
Keywords:
Applications, Automobiles, Bayonet lamp caps, Blank forms, Candle lamps, Candle shape, Cap gauges, Cap sleeves, Capacitive loads, CE marking, Checks, Clamps, Classification, Clearances, Cones, Connections, Connectors, Contact, Contact piece, Contact pins, Contact safety devices, Coordination, Creepage distances, Current flow, Current supply, Design, Designation systems, Designations, Detail specification, Dielectric strength, Dimensioning, Dimensions, Earthing conductor terminations, Edison screw threads, Electric contact protection, Electric contacts, Electric lamps, Electrical components, Electrical engineering, Electrical resistance, Electrical safety, Electronic equipment and components, Film resistors, Fire resistance, Fits, Fittings, Fixed film resistors, Fixed resistors, Fluorescent lamps, Force measurement, Gauges, General lighting service lamps, Go-gauges, Guide books, Holding devices, IEC, IEC cap gauges, IEC gauges, IEC holder gauges, IEC lamp caps, IEC lampholders, Illuminating engineering, Illumination engineering, Incandescent lamps, Information, Inscription, Insertion force, Inspection, Insulating resistance, Insulations, Insulator bodies, Interchangeability, International, Lamp caps, Lampholder gauges, Lampholders, Lamps, Leakage paths, Lighting plants, Lighting systems, Limit deviations, Loose-leaf manuals, Low power methods, Luminaires, Marking, Measuring instruments, Mechanical properties, Metal films, Minimum retention force, Mining, Moisture resistance, Motor vehicles, Motor-car lamps, Non-interchangeability, Non-wirewound resistors, Not-go gauges, Order indications, Packages, P-caps, Pin lamp caps, Plinths, Protection against electric shocks, Qualification tests, Quality assessment procedures, Quality assessment systems, Rating, Ratings, Recording, Replaceability, Resistors, Retention force, Right-hand screw threads, Road vehicles, Routine tests, Safety, Safety engineering, Screw lamp caps, Service voltage, Sheathings, Small lamps, Sockets, Specification (approval), Stability, Strength of materials, Symbols, Technical data sheets, Tension crack corrosion, Testing, Testing requirements, Thermal stability, Threads, Tolerances (measurement), Tracking index, Tracking resistance, Tubular lamps, Tungsten-halogen lamps, Use, Vehicle lights, Withdrawal force
409,44
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta