Saltar navegación principal
Normas DIN – AENOR
DIN EN 1501-2:2018-02

DIN EN 1501-2:2018-02

Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles; German and English version prEN 1501-2:2018 / Note: Date of issue 2018-01-05*Intended as replacement for DIN EN 1501-2 (2010-02).

Bennes de collecte des déchets et leurs lève-conteneurs associés - Exigences générales et exigences de sécurité - Partie 2: Bennes à chargement latéral; Version allemande et anglaise prEN 1501-2:2018 / Attention: Date de parution 2018-01-05*Prévu pour remplacer DIN EN 1501-2 (2010-02).

Abfallsammelfahrzeuge und die dazugehörigen Schüttungen - Allgemeine Anforderungen und Sicherheitsanforderungen - Teil 2: Seitenlader; Deutsche und Englische Fassung prEN 1501-2:2018 / Achtung: Erscheinungsdatum 2018-01-05*Vorgesehen als Ersatz für DIN EN 1501-2 (2010-02).

Fecha:
2018-02 /Active
Equivalencias internacionales:

prEN 1501-2 (2018-02)

Resumen:
This European Standard specifies the technical requirements to minimise the hazards listed in Clause 5 which can arise during the operation and the maintenance of side loaded refuse collection vehicles (side loaded RCVs) used for the collection, transportation and unloading of solid wastes and as intended by the manufacturer or his authorised representative.This European Standard deals with:- side loaded refuse collection vehicles as defined in Clauses 3 and 4;- lifting devices for side loaded refuse collection vehicles.Examples for basic types of side loaded refuse collection vehicles are given in Annex B.This European Standard does not establish the additional requirements for:- design and equipment of the chassis, considered as meeting all road traffic requirements;- operation in severe conditions (e. g. extreme environmental conditions such as: temperatures below -10 °C and above +40 °C, corrosive environment, tropical environment);- operation subject to special rules (e. g. potentially explosive atmospheres, contaminating environments);- static electricity problems;- transportation of passengers, lifting of persons;- loading by crane;- loading by a satellite vehicle;- containers other than those manufactured according to EN 840, EN 12574 and EN 13071;- handling of loads the nature of which could lead to dangerous situations (e. g. hot wastes, acids and bases, radioactive materials, especially fragile loads, explosives);- hazards occurring during construction, transportation, commissioning, decommissioning;- hazards occurring in relation to traffic on public roads;- wind velocity in excess of 75 km/h;- direct contact with foodstuffs;- hazards due to the noise of the side loaded RCV.
Keywords:
Accident prevention, Bodies, CE marking, Chassis, Classification, Collections, Communal purposes, Communication, Compacting, Control, Definitions, Design, Discharge, Discharge device, Dumps, Electrical equipment, Electrical safety, Explosion hazard, Explosions, Footboard, Graphic symbols, Handlings, Hazards, Health protection, Hydraulics, Impact, Lay, Lighting systems, Loaders, Maintenance, Marking, Materials, Materials of value, Mechanical crimping, Noise, Noise (environmental), Noise reduction, Occupational safety, Operating instructions, Operational instructions, Public service vehicles, Rear-end loaded refuse collection vehicles, Recycling, Refuse collection vehicles, Refuse disposal, Risk of stumbling, Safety, Safety of machinery, Safety requirements, Side loaded vehicles, Sound, Specification (approval), Stability, Sumps, Symbols, Testing, Transport, Usage, Vehicles, Waste collection, Wastes, Workplace safety
112,15
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta