Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 19901-7:2018-03

DIN EN ISO 19901-7:2018-03

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO/DIS 19901-7:2017); English version prEN ISO 19901-7:2017, only on CD-ROM / Note: Date of issue 2018-02-16*CD-ROM

Industries du pétrole et du gaz naturel - Exigences spécifiques relatives aux structures en mer - Partie 7: Systèmes de maintien en position des structures en mer flottantes et des unités mobiles en mer (ISO/DIS 19901-7:2017); Version anglaise prEN ISO 19901-7:2017, seulement en CD-ROM / Attention: Date de parution 2018-02-16*CD-ROM

Erdöl- und Erdgasindustrie - Spezielle Anforderungen an Offshore-Anlagen - Teil 7: Betriebssysteme für das Positionshalten schwimmender Anlagen und mobiler Offshore-Einheiten (ISO/DIS 19901-7:2017); Englische Fassung prEN ISO 19901-7:2017, nur auf CD-ROM / Achtung: Erscheinungsdatum 2018-02-16*CD-ROM

Fecha Anulación:
2018-11 /Withdrawn
Equivalencias internacionales:

ISO/DIS 19901-7 (2017-11)

prEN ISO 19901-7 (2017-11)

This part of ISO 19901 specifies methodologies for a) the design, analysis and evaluation of stationkeeping systems for floating structures used by the oil and gas industries to support any combination of: 1) production; 2) storage; 3) offloading; 4) drilling and well Intervention; b) the assessment of stationkeeping systems for site-specific applications of mobile offshore units and construction units. Most stationkeeping systems used with the class of floating structures covered by a) are termed "permanent mooring Systems", for which this part of ISO 19901 is applicable to all aspects of the life cycle and includes requirements relating to the manufacture of mooring components, as well as considerations for in-service inspections. Most stationkeeping systems used with mobile offshore units, the class covered by b), are termed "mobile mooring Systems". Throughout this part of ISO 19901, the term "floating structure", sometimes shortened to "structure", is used as a generic term to indicate any member of the two classes, a) and b). This part of ISO 19901 is applicable to the following types of stationkeeping systems, which are either covered directly in this part of ISO 19901 or through reference to other guidelines: - spread moorings (catenary, taut-line and semi-taut-line moorings); - single point moorings, anchored by spread mooring arrangements; - dynamic positioning systems; - thruster-assisted moorings. Descriptions of the characteristics and of typical components of these systems are given in Annex A.
Anchorages, Building inspection, Checks, Construction requirements, Constructions, Definitions, Design, Floating equipment, Floating system, Industries, Mooring devices, Natural gas, Natural gas extraction, Natural gas industries, Offshore construction works, Offshore platforms, Oil industries, Oil production, Operating systems, Petroleum, Petroleum extraction, Platforms, Position, Position control, Safety engineering, Safety requirements, Seating device, Specification, Specification (approval), Stations, Testing
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta