Saltar navegación principal
Normas DIN – AENOR
DIN EN 13476-3:2018-12

DIN EN 13476-3:2018-12

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B; German version EN 13476-3:2018

Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 3: Spécifications pour les tubes et raccords avec une surface interne lisse et une surface externe profilée et le système, de Type B; Version allemande EN 13476-3:2018

Kunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -leitungen - Rohrleitungssysteme mit profilierter Wandung aus weichmacherfreiem Polyvinylchlorid (PVC-U), Polypropylen (PP) und Polyethylen (PE) - Teil 3: Anforderungen an Rohre und Formstücke mit glatter Innen- und profilierter Außenfläche und an das Rohrleitungssystem, Typ B; Deutsche Fassung EN 13476-3:2018

Fecha Anulación:
2020-12 /Withdrawn
Equivalencias internacionales:

EN 13476-3 (2018-04)

Relación con otras normas DIN:

Reemplaza a: DIN EN 13476-3:2009-04

Reemplaza a: DIN EN 13476-3:2016-11

Reemplazada por: DIN EN 13476-3:2020-12

Resumen:
This part of EN 13476, together with EN 13476-1, specifies the definitions and requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are intended to be used for non-pressure underground drainage and sewerage systems. This part is applicable to pipes and fittings with smooth internal and profiled external surfaces, designated as Type B. It specifies test methods and test parameters as well as requirements. This part is applicable to: a) structured-wall pipes and fittings, which are intended to be used buried underground outside the building structure; b) structured-wall pipes and fittings, which are intended to be used buried underground both outside and within the building structure. This part is applicable to structured-wall pipes and fittings with or without an integral socket with elastomeric ring seal joints as well as welded and fused joints. This part covers a range of pipe and fitting sizes, materials, pipe constructions, stiffness classes, application classes, and tolerance classes and gives recommendations concerning colours.
Keywords:
Classification, Determination, Fittings, Interior surface, Marking, Materials, Mouldings (shaped section), Outer surfaces, PE, Pipelines, Pipes, Piping system, Piping test, Plastic pipelines, Plastic pipes, Plastics, Polyethylene, Polypropylene, Polyvinyl chloride, PP, Procedures, Profiled, Properties, Protective tubes, PVC-U, Sealing rings, Sewerage, Sewers, Side, Sleeves, Specification (approval), Symbols, Testing, Thermoplastic polymers, Underground, Unplasticized polyvinyl chloride
117,29
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta