Saltar navegación principal
Normas DIN – AENOR
DIN 4108-3:2017-09

DIN 4108-3:2017-09

Thermal protection and energy economy in buildings - Part 3: Protection against moisture subject to climate conditions - Requirements and directions for design and construction / Note: Date of issue 2017-08-25

Protection thermique et économie d'énergie dans la construction immobilière - Partie 3: Protection contre l'humidité conditionnée par le climat - Exigences et directions pour le calcul et l'exécution / Attention: Date de parution 2017-08-25

Wärmeschutz und Energie-Einsparung in Gebäuden - Teil 3: Klimabedingter Feuchteschutz - Anforderungen, Berechnungsverfahren und Hinweise für Planung und Ausführung / Achtung: Erscheinungsdatum 2017-08-25

Fecha Anulación:
2018-10 /Withdrawn
Relación con otras normas DIN:

Reemplazada por: DIN 4108-3:2018-10

Resumen:
This document specifies requirements, calculation procedures and instructions for the planning and implementation of climate-related moisture protection in buildings. It does not apply to the construction of structures. Ancillary rooms, which are part of occupied rooms, are treated as occupied rooms within the meaning of this standard. Evidence of the moisture-proof safety of building structures can be carried out using a three-stage assessment methodology depending on the application. The first stage is the selection of a proof-free design, the second stage is the simple verification using the period-balancing method and the 3rd stage the detection by hygrothermal simulation. The 1st and 2nd stages are exclusively applicable to permitted components of buildings which are not air-conditioned or residential-like.
Keywords:
Air tightness, Brickwork, Bridges, Buildings, Climate, Components, Condensating water, Construction, Current density, Damp-proofing, Definitions, Design, Dew, Diffusion, Diffusion resistance, Driving rain, Energy, Energy conservations, Energy demands, Energy economics, Evaporation, Heat, Heat flow density, Heating equipment, Humidity, Mathematical calculations, Measurement, Measuring techniques, Methods of calculation, Moisture, Planning, Protective measures, Rainfall, Roofs, Specification (approval), Temperature, Thermal bridges, Thermal conductivity, Thermal design of buildings, Thermal insulation, Thermal protection, Thermal resistance, Thermal storage, Thermal transmission coefficient, Ventilated at rear, Ventilation
135,7
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta