Saltar navegación principal
Normas DIN – AENOR
DIN EN 60061-2:2017-10

DIN EN 60061-2:2017-10

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders (IEC 60061-2:1969 + supplements A:1970 to S:1997 + A18:1998 to A50:2015 + A51:2016, modified); German version EN 60061-2:1993 + A1:1995 to A7:1997 + A18:1998 to A50:2015 + A51:2016 / Note: Loose-leaf publication*DIN EN 60061-2 (2017-03) remains valid alongside this standard until 2019-07-04.*A transition period, as set out in DIN EN 60061-2 (2018-09), exists until 2021-01-19.

Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 2: Douilles (IEC 60061-2:1969 + compléments A:1970 à S:1997 + A18:1998 à A50:2015 + A51:2016, modifiée); Version allemande EN 60061-2:1993 + A1:1995 à A7:1997 + A18:1998 à A50:2015 + A51:2016 / Attention: Recueil à feuilles mobiles*DIN EN 60061-2 (2017-03) reste valable avec la présente norme jusqu'à 2019-07-04.*Il existe un délai de transition comme fixé en DIN EN 60061-2 (2018-09) jusqu'à 2021-01-19.

Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 2: Lampenfassungen (IEC 60061-2:1969 + Ergänzungen A:1970 bis S:1997 + A18:1998 bis A50:2015 + A51:2016, modifiziert); Deutsche Fassung EN 60061-2:1993 + A1:1995 bis A7:1997 + A18:1998 bis A50:2015 + A51:2016 / Achtung: Loseblattsammlung*Daneben gilt DIN EN 60061-2 (2017-03) noch bis 2019-07-04.*Übergangsfrist, festgelegt durch DIN EN 60061-2 (2018-09), bis 2021-01-19 beachten.

Fecha Anulación:
2018-09 /Withdrawn
Equivalencias internacionales:

EN 60061-2 (1993-03)

EN 60061-2/A1 (1995-01)

EN 60061-2/A18 (1998-04)

EN 60061-2/A19 (1999-04)

EN 60061-2/A2 (1995-12)

EN 60061-2/A20 (1999-09)

EN 60061-2/A21 (2000-11)

EN 60061-2/A22 (2001-04)

EN 60061-2/A23 (2001-04)

EN 60061-2/A24 (2001-11)

EN 60061-2/A25 (2002-06)

EN 60061-2/A26 (2002-06)

EN 60061-2/A27 (2002-11)

EN 60061-2/A28 (2003-06)

EN 60061-2/A29 (2003-10)

EN 60061-2/A3 (1995-12)

EN 60061-2/A30 (2003-12)

EN 60061-2/A31 (2004-09)

EN 60061-2/A32 (2005-01)

EN 60061-2/A33 (2005-11)

EN 60061-2/A34 (2006-09)

EN 60061-2/A35 (2007-03)

EN 60061-2/A36 (2007-05)

EN 60061-2/A37 (2008-09)

EN 60061-2/A38 (2009-06)

EN 60061-2/A39 (2009-10)

EN 60061-2/A4 (1996-03)

EN 60061-2/A40 (2010-10)

EN 60061-2/A41 (2010-10)

EN 60061-2/A42 (2011-11)

EN 60061-2/A43 (2011-11)

EN 60061-2/A44 (2012-02)

EN 60061-2/A45 (2012-11)

EN 60061-2/A46 (2013-05)

EN 60061-2/A47 (2014-05)

EN 60061-2/A48 (2015-05)

EN 60061-2/A49 (2015-10)

EN 60061-2/A5 (1996-08)

EN 60061-2/A50 (2015-12)

EN 60061-2/A51 (2016-09)

EN 60061-2/A6 (1996-12)

EN 60061-2/A7 (1997-05)

Relación con otras normas DIN:

Reemplaza a: DIN EN 60061-2/A51:2017-02

Reemplaza a: DIN EN 60061-2:2017-03

Reemplazada por: DIN EN 60061-2:2018-09

Resumen:
The standard sheets of part 2 of this Standard series set requirements for lamp holders which are necessary for the exchange of a lamp with a specific cap and the associated holder.
Die Normblätter des Teils 2 dieser Normenreihe legen Anforderungen an Lampenfassungen fest, die für die Austauschbarkeit einer Lampe mit einem bestimmten Sockel in der dazugehörigen Lampenfassung von Bedeutung sind.
Keywords:
Applications, Automobiles, Bayonet lamp caps, Blank forms, Candle lamps, Candle shape, Cap gauges, Cap sleeves, Capacitive loads, CE marking, Checks, Clamps, Classification, Clearances, Cones, Connections, Connectors, Contact, Contact piece, Contact pins, Contact safety devices, Coordination, Creepage distances, Current flow, Current supply, Design, Designation systems, Designations, Detail specification, Dielectric strength, Dimensioning, Dimensions, Earthing conductor terminations, Edison screw threads, Electric contact protection, Electric contacts, Electric lamps, Electrical components, Electrical engineering, Electrical resistance, Electrical safety, Electronic equipment and components, Film resistors, Fire resistance, Fits, Fittings, Fixed film resistors, Fixed resistors, Fluorescent lamps, Force measurement, Gauges, General lighting service lamps, Go-gauges, Guide books, Holding devices, IEC, IEC cap gauges, IEC gauges, IEC holder gauges, IEC lamp caps, IEC lampholders, Illuminating engineering, Illumination engineering, Incandescent lamps, Information, Inscription, Insertion force, Inspection, Insulating resistance, Insulations, Insulator bodies, Interchangeability, International, Lamp caps, Lampholder gauges, Lampholders, Lamps, Leakage paths, Lighting plants, Lighting systems, Limit deviations, Loose-leaf manuals, Low power methods, Luminaires, Marking, Measuring instruments, Mechanical properties, Metal films, Minimum retention force, Mining, Moisture resistance, Motor vehicles, Motor-car lamps, Non-wirewound resistors, Not-go gauges, Order indications, Packages, P-caps, Pin lamp caps, Plinths, Protection against electric shocks, Qualification tests, Quality assessment procedures, Quality assessment systems, Rating, Ratings, Recording, Replaceability, Resistors, Retention force, Right-hand screw threads, Road vehicles, Routine tests, Safety, Safety engineering, Screw lamp caps, Service voltage, Sheathings, Small lamps, Sockets, Specification (approval), Stability, Strength of materials, Symbols, Technical data sheets, Tension crack corrosion, Testing, Testing requirements, Thermal stability, Threads, Tolerances (measurement), Tracking index, Tracking resistance, Tubular lamps, Tungsten-halogen lamps, Use, Vehicle lights, Withdrawal force
207,94
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta