Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 18563-2:2017-12

DIN EN ISO 18563-2:2017-12

Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes (ISO 18563-2:2017); German version EN ISO 18563-2:2017

Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle par ultrasons en multiéléments - Partie 2: Traducteurs (ISO 18563-2:2017); Version allemande EN ISO 18563-2:2017

Zerstörungsfreie Prüfung - Charakterisierung und Verifizierung der Ultraschall-Prüfausrüstung mit Phased-Arrays - Teil 2: Prüfköpfe (ISO 18563-2:2017); Deutsche Fassung EN ISO 18563-2:2017

Fecha:
2017-12 /Active
Equivalencias internacionales:

EN ISO 18563-2 (2017-08)

ISO 18563-2 (2017-07)

Relación con otras normas DIN:
Resumen:
This document covers following phased array probes used for ultrasonic non-destructive testing in contact technique (with or without a wedge) or in immersion technique, with centre frequencies in the range 0,5 MHz -10 MHz.- linear,- encircling,- 2D matrix,- partial annular sectorial (Type "Daisy").This document specifies the characterisation tests that have to be done at the end of the fabrication of a phased array probe. It defines both methodology and acceptance criteria.This document does not describe methods and acceptance criteria to characterise the performance of an ultrasonic phased array instrument or the performance of a combined system. These are described in EN ISO 18563-1 and in EN ISO 18563-3.
Keywords:
Calibration blocks, Definitions, Non-destructive testing, Performance tests, Probe, Specifications, Testing, Ultrasonic flaw detector, Ultrasonic test systems, Ultrasonics
64,67
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta