Saltar navegación principal
Normas DIN – AENOR
DIN 27205-1:2017-03

DIN 27205-1:2017-03

State of railway vehicles - Brake - Part 1: Tread brake, mechanical part / Note: DIN 27205-1 (2010-11) remains valid alongside this standard until 2017-09-30.

État des véhicules ferroviaires - Frein - Partie 1: Bloc de frein, part mécanique / Attention: DIN 27205-1 (2010-11) reste valable avec la présente norme jusqu'à 2017-09-30.

Zustand der Eisenbahnfahrzeuge - Bremse - Teil 1: Klotzbremse, mechanischer Teil / Achtung: Daneben gilt DIN 27205-1 (2010-11) noch bis 2017-09-30.

2017-03 /Active
Relación con otras normas DIN:

Reemplaza a: DIN 27205-1:2010-11

Reemplaza a: DIN 27205-1:2016-06

The standards of the collection "State of the railway vehicle" contained technical specifications for safety-relevant systems and components of railway vehicles on standard gauge(standard gauge vehicles according to DIN 25003) which are required for safety and monitoring purposes. This standard defines the limit state for the safe operation of railway vehicles for standard gauge width and their components. It shall be applied provided that the vehicles are operated on a public railway infrastructure. The minimum requirements laid down in the standards for the processes for observing the desired condition of the railway vehicles are also to be applied. In addition, this standard should also be observed when designing new constructions when constructive precautions are to be taken to ensure compliance with the operating limit criteria. NOTE 1 The structural design for a confortable maintenance check of the operating limits should be considered. NOTE 2 The applicability of this standard to railway vehicles of other track widths and their components may be examined in individual cases. This standard applies to block brakes of railway vehicles and treats the mechanical part of the single-block and double-acting block brakes and describes the technical condition of the following assemblies: a) brake linkage including slack adjuster and friction elements (friction brake pads); b) handbrake / parking brake; c) operating and action devices; d) brake cylinder (without function test). Recommendations for compact braking units are given in an informative Annex A.
Abrasion tests, Block brakes, Brake blocks, Brake cylinders, Brake gears, Brakes, Braking system, Classification, Definitions, Hand brakes, Maintenance, Operational safety, Parking brakes, Performance tests, Railway applications, Railway vehicles, Railway wagons, Railways, Surveys, Traction vehicles, Tramway systems, Wagons
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta