Saltar navegación principal
Normas DIN – AENOR
DIN EN 1366-10:2017-07

DIN EN 1366-10:2017-07

Fire resistance tests for service installations - Part 10: Smoke control dampers; German version EN 1366-10:2011+A1:2017 / Note: Applies in conjunction with DIN EN 1363-1 (2012-10), DIN EN 1366-2 (2015-09), DIN EN 12101-8 (2011-08), DIN EN 13501-4 (2016-12).*To be replaced by DIN EN 1366-10 (2020-08).

Essais de résistance au feu des installations techniques - Partie 10: Volets de désenfumage; Version allemande EN 1366-10:2011+A1:2017 / Attention: Valable en conjointement avec DIN EN 1363-1 (2012-10), DIN EN 1366-2 (2015-09), DIN EN 12101-8 (2011-08), DIN EN 13501-4 (2016-12).*À remplacer par DIN EN 1366-10 (2020-08).

Feuerwiderstandsprüfungen für Installationen - Teil 10: Entrauchungsklappen; Deutsche Fassung EN 1366-10:2011+A1:2017 / Achtung: Gilt in Verbindung mit DIN EN 1363-1 (2012-10), DIN EN 1366-2 (2015-09), DIN EN 12101-8 (2011-08), DIN EN 13501-4 (2016-12).*Vorgesehener Ersatz durch DIN EN 1366-10 (2020-08).

Fecha:
2017-07 /Active
Equivalencias internacionales:

EN 1366-10+A1 (2017-04)

Relación con otras normas DIN:
Resumen:
EN 1366-10 specifies test methods for smoke control dampers to assess their performance under elevated temperature or fire conditions. It needs to be noted that the smoke control damper to be tested may require testing to EN 1366-2 and that this needs to be considered before carrying out these tests. Smoke control damper tests are required to confirm that the furnace testing requirements of EN 12101-8 are met and EN 12101-8 needs to be considered before carrying out these tests. Smoke control dampers tested to this European Standard should be classified using EN 13501-4 and this European Standard needs to be considered before carrying out these tests. To this end this European Standard needs to be read in conjunction with EN 12101-8, EN 13501-4, EN 1366-2 and EN 1363-1, the latter giving further details for fire resistance testing. For installation details the requirements for smoke extraction ducts need to be considered and these are defined in EN 1366-8 and EN 1366-9.
Keywords:
Construction, Definitions, Evaluations, Fire resistance, Fire safety, Fire safety in buildings, Fire technology, Fire tests, Firefighting, Flaps, Functions, Gas supply, Inspection, Installations, Marking, Production, Smoke control, Smoke control dampers, Smoke extraction (buildings), Specification (approval), Structural fire protection, Testing, Types
124,02
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta