Saltar navegación principal
Normas DIN – AENOR
DIN EN 15316-1:2017-09

DIN EN 15316-1:2017-09

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4; German version EN 15316-1:2017

Performance énergétique des bâtiments - Méthode de calcul des besoins énergétiques et des rendements des systèmes - Partie 1: Généralités et expression de la performance, Modules M3-1, M3-4, M3-9, M8-1, M8-4; Version allemande EN 15316-1:2017

Energetische Bewertung von Gebäuden - Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 1: Allgemeines und Darstellung der Energieeffizienz, Modul M3-1, M3-4, M3-9, M8-1, M8-4; Deutsche Fassung EN 15316-1:2017

Fecha:
2017-09 /Active
Equivalencias internacionales:

EN 15316-1 (2017-04)

Relación con otras normas DIN:
Resumen:
This European Standard is the general frame for the calculation of the energy use and the energy performance of heating and domestic hot water systems. This standards is only dealing with the heat, provided by water based systems, needed for heating, domestic hot water and cooling (e. g. absorption chiller). It specifies how to perform the calculation of the entire installation using the calculation modules (see Table 2) corresponding to the methods defined in the respective standards. It deals with common issues like operating conditions calculation and energy performance indicators. It standardises the inputs and outputs in order to achieve a common European calculation method. It allows the energy analysis of the heating and Domestic hot water systems and sub-systems including control (emission, distribution, storage, generation) by comparing the system losses and by defining energy performance indicators. The performance analysis allows the comparison between systems and sub-systems and makes possible to evaluate the impact of each sub-system on the energy performance of a building. The calculation of the system losses of each part of the heating sub-systems is defined in subsequent standards. Ventilation systems are not included in this standard (e. g. balanced systems with heat recovery), but if the air is preheated or an air heating system is installed, the systems providing the heat to the AHU (Air Handling Unit) are covered by this standard. In Germany Directive 2010/31/EU of the European Parliament and of the Council on the energy performance of buildings is implemented by the national Energieeinsparrecht. The national Energieeinsparrecht is based on national and European Standards and national pre-Standards, which have been specified for implementation in Germany.
Keywords:
Assessment, Building services, Buildings, Central heating, Definitions, Drinking water installations, Efficiency, Electric energy, Energy consumption, Energy demands, Energy losses, Energy performance, Heat distribution, Heat engineering, Heat loss, Heat supply, Heating energy, Heating equipment, Heating installations, Hot water heating systems, Hot water preparation plants, Hot-water central heating, Hot-water generators, Mathematical calculations, Methods of calculation, Recovery, Regeneration, Service installations in buildings, Space-heating systems, Systemology, Temperature distribution, Thermal design of buildings, Thermal environment systems, Thermal output, Warm water supply, Waste heat recovery, Water distribution, Water heating
162,9
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta