Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 10848-3:2016-10

DIN EN ISO 10848-3:2016-10

Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 3: Application to Type B elements when the junction has a substantial influence (ISO/DIS 10848-3:2016); German and English version prEN ISO 10848-3:2016 / Note: Date of issue 2016-09-02

Acoustique - Mesurage en laboratoire des transmissions latérales du bruit aérien et des bruits de choc entre des pièces adjacentes - Partie 3: Application aux éléments de Type B lorsque la jonction a une influence importante (ISO/DIS 10848-3:2016); Version allemande et anglaise prEN ISO 10848-3:2016 / Attention: Date de parution 2016-09-02

Akustik - Messung der Flankenübertragung von Luftschall, Trittschall und Schall von Gebäudetechnischen Anlagen zwischen benachbarten Räumen im Prüfstand und am Bau - Teil 3: Anwendung auf Typ B-Bauteile, wenn die Verbindung wesentlichen Einfluss hat (ISO/DIS 10848-3:2016); Deutsche und Englische Fassung prEN ISO 10848-3:2016 / Achtung: Erscheinungsdatum 2016-09-02

Fecha Anulación:
2018-02 /Withdrawn
Equivalencias internacionales:

ISO/DIS 10848-3 (2016-09)

prEN ISO 10848-3 (2016-09)

Relación con otras normas DIN:

Reemplazada por: DIN EN ISO 10848-3:2018-02

Resumen:
ISO 10848 specifies measurement methods to be performed in a laboratory test facility or in the field in order to characterize the flanking transmission of one or several building components. This part of ISO 10848 specifies laboratory and field measurements of buildings for Type B elements (defined in ISO 10848-1) when the junction has a substantial influence. Laboratory measurements are used to quantify the performance of the junction with suppressed flanking transmission from the laboratory structure. Field measurements are used to characterize the in situ performance and it is not usually possible to suppress unwanted flanking transmission; hence the results can only be considered representative of the performance of that junction when installed in that particular building structure. This part of ISO 10848 is referred to in ISO 10848-1, 4.5, as being a supporting part to the frame document and applies to Type B elements that are structurally connected as defined in ISO 10848-1. The measured quantities can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as ISO 12354-1 and ISO 12354-2.
Keywords:
Acoustic engineering, Acoustic measurement, Acoustic testing, Acoustic testing rooms, Acoustics, Air terminal devices, Airborne noise, Airborne sound, Airborne sound insulation, Building acoustics, Buildings, Ceilings, Closed test rooms, Components, Construction, Dampers, Definitions, Determination, Doors, Flanking transmission, Floors, Glazing, Impact sound, Impact sound insulation, Junctions, Laboratories, Lightweight construction elements, Materials testing, Measurement, Measurement of airborne noise, Noise, Noise measurement, Reverberation room method, Reverberation rooms, Sound deadening, Sound insulation, Sound intensity, Sound level, Sound levels, Sound power, Sound transmission, Specification (approval), Structural members, Structural systems, Test benches, Test furnaces, Test reports, Testing, Testing set-ups, Utility equipment, Walls, Windows
65,98
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta