Saltar navegación principal
Normas DIN – AENOR
DIN 19658-3:2016-06

DIN 19658-3:2016-06

Polyethylene (PE) coiling pipes and hoses for use in irrigation systems - Hoses of nonrigid material with woven fabric inner layer - Part 3: Dimensions and technical delivery conditions

Tubes à base de polyéthylène (PE) susceptibles d'être enroulés et tuyaux de caoutchouc souples pour systèmes d'irrigation - Tuyaux de caoutchouc souples renforcés entoilés (sans stabilité dimensionnelle) - Partie 3: Dimensions et conditions techniques de livraison

Wickelbare Rohre aus Polyethylen (PE) und Schläuche für Bewässerungsanlagen - Schläuche mit Gewebeeinlage, formunbeständig - Teil 3: Maße und Technische Lieferbedingungen

Fecha:
2016-06 /Active
Relación con otras normas DIN:

Reemplaza a: DIN 19658-3:2015-12

Reemplaza a: DIN 19658-3:1988-10

Resumen:
This standard specifies dimensions and technical terms of delivery of fabriclined hoses (unstable with regard of dimensions) for irrigation systems. It is applicable to unstable fabriclined hoses for irrigation systems with a working pressure of 16 bar (1,6 MPa) for hoses with an inner diameter up to 75 mm and 12 bar (1,2 MPa) for hoses with an inner diameter of 90 mm to 152 mm, bigger diameters with 10 bar (1,0 MPa). Hoses can be coiled up and are used to feed irrigation systems with water.
Keywords:
Acceptance specification, Coiling, Definitions, Delivery conditions, Dimensions, Fabric inlay, Flexible pipes, Hoses, Irrigation works, Marking, Material properties, Materials, PE, Pipes, Polyethylene, Properties, Specification (approval), Tolerances (measurement), Water practice
34,95
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta