Saltar navegación principal
Normas DIN – AENOR
DIN EN 14793:2017-05

DIN EN 14793:2017-05

Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method; German version EN 14793:2017

Émissions de sources fixes - Démonstration de l'équivalence d'une méthode alternative avec une méthode de référence; Version allemande EN 14793:2017

Emissionen aus stationären Quellen - Nachweis der Gleichwertigkeit eines Alternativverfahrens mit einem Referenzverfahren; Deutsche Fassung EN 14793:2017

Fecha:
2017-05 /Active
Equivalencias internacionales:

EN 14793 (2017-01)

Relación con otras normas DIN:
Resumen:
This European Standard specifies a procedure to demonstrate the equivalence of an alternative method (AM) with the reference method (RM) or the standard reference method (SRM), both implemented to determine the same measurand. In particular, this European Standard provides the statistical tools and different criteria to evaluate the alternative method. This does not release the body performing the equivalence testing from bearing technical and analytical judgement on the evaluation of the different criteria. Three steps are required for demonstration of equivalence: - description of the alternative method and setting of the field of application (measurement range and type of gas matrix); - determination of the performance characteristics of the alternative method and calculation of the expanded uncertainty where appropriate and check of compliance with the maximum expanded uncertainty allowed for the reference method; - check of repeatability and lack of systematic deviation of the alternative method in the field or on a recognized test bench in comparison with the reference method for the type of matrix defined in the field of equivalence. This European Standard requires that a reference method has been defined and validated. This European Standard only considers the case of linear quantitative methods. This European Standard is applicable to manual and automated methods. This European Standard has been drawn up for laboratories working in air quality measurements and consequently an example taken from this sector are presented in Annex A. This European Standard supersedes CEN/TS 14793:2005.
Keywords:
Air pollution, Air purification, Air quality, Definitions, Emission, Emission measurement, Equivalence, Laboratory testing, Linear, Measurement, Measuring techniques, Measuring uncertainty, Reference methods, Stationary, Statistical methods of analysis, Testing, Validation, Wear-quantity
90,09
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta