Saltar navegación principal
Normas DIN – AENOR
DIN EN 14313:2016-03

DIN EN 14313:2016-03

Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification; German version EN 14313:2015 / Note: To be amended by DIN EN 14313/A1 (2018-12).

Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Produits manufacturés en mousse de polyéthylène (PEF) - Spécification; Version allemande EN 14313:2015 / Attention: Amendement prévu par DIN EN 14313/A1 (2018-12).

Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus Polyethylenschaum (PEF) - Spezifikation; Deutsche Fassung EN 14313:2015 / Achtung: Vorgesehene Änderung durch DIN EN 14313/A1 (2018-12).

Fecha:
2016-03 /Active
Equivalencias internacionales:

EN 14313 (2015-12)

Relación con otras normas DIN:

Reemplaza a: DIN EN 14313:2015-06

Reemplaza a: DIN EN 14313:2013-04

Resumen:
This European Standard specifies the requirements for factory made flexible polyethylene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 80 °C to + 150 °C. Tensile stress in the insulation product should be avoided when applying PEF. This is even more important when applying PEF on lines with operating temperatures between - 50 °C and - 80 °C. The tensile stress should be kept at the minimum by applying the foam "under pressure", i.e. cutting the parts in a generous way. Manufacturers advice should be heeded in all cases. The products are manufactured in the form of tubes, profiles, sheets, rolls and tapes with or without coating and/or self-adhesive backing and/or different closure systems. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,050 W/(m·K) at 10 °C are not covered by this standard. This standard does not cover products for the insulation of the building structure. The normative part of this standard does not cover compressive stress (see C.4).
Keywords:
Basic domestic facilities, Building services, Buildings, CE marking, Checks, Classification, Conformity, Construction, Construction materials, Constructional products, Definitions, Design, Designations, Dimensions, Energy conservations, Foamed plastics, Foamed rubber, Form of delivery, Industries, Inspection, Insulating materials, Marking, Material properties, Materials testing, Measurement, Measuring techniques, Polyethylene, Polyethylene foam, Production control, Properties, Quality assurance, Ratings, Service installations, Specification, Specification (approval), Surface spread of flame, Surveillance (approval), Testing, Thermal conductivity, Thermal insulating materials, Thermal insulation, Thermal protection, Use
97,76
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta