Saltar navegación principal
Normas DIN – AENOR
DIN ISO 16486-5:2015-07

DIN ISO 16486-5:2015-07

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 5: Fitness for purpose of the system (ISO 16486-5:2012) / Note: To be replaced by DIN EN ISO 16486-5 (2020-06).

Systèmes de canalisations en matières plastiques pour la distribution de combustibles gazeux - Systèmes de canalisations en polyamide non plastifié (PA-U) avec assemblages par soudage et assemblages mécaniques - Partie 5: Aptitude à l'emploi du système (ISO 16486-5:2012) / Attention: À remplacer par DIN EN ISO 16486-5 (2020-06).

Kunststoff-Rohrleitungssysteme für die Gasversorgung - Rohrleitungssysteme aus weichmacherfreiem Polyamid (PA-U) mit Schweißverbindungen und mechanischen Verbindungen - Teil 5: Gebrauchstauglichkeit des Systems (ISO 16486-5:2012) / Achtung: Vorgesehener Ersatz durch DIN EN ISO 16486-5 (2020-06).

2015-07 /Active
Equivalencias internacionales:

ISO 16486-5 (2012-06)

Relación con otras normas DIN:
This part of ISO 16486 specifies the requirements of fitness for purpose of the unplasticized polyamide (PA-U) piping system, intended to be buried and used for the supply of gaseous fuels. It also specifies the definitions of electrofusion and butt fusion joints. This part of ISO 16486 specifies the method of preparation of test piece joints and the tests to be carried out on these joints for assessing the fitness for purpose of the system under normal and extreme conditions. It also specifies the test parameters for the test methods to which it refers. ISO 16486 is applicable to PA-U piping systems the components of which are connected by fusion jointing and/or mechanical jointing. In conjunction with the other parts of ISO 16486, it is applicable to PA-U fittings, their joints and to joints with components of PA-U.
Connecting pieces, Definitions, Dimensions, Extruded, Extrusion, Fitness for purpose, Gas supply, Geometrical properties, Inspection, Joints, Marking, Materials, Mechanical properties, Modulus of elasticity, Mouldings (shaped section), Operating overload pressure, Packages, Physical properties, Pipe fittings, Pipelines, Pipes, Plastic pipelines, Plastic pipes, Plastics, Polyamides, Pressure, Production, Sleeves, Socket pieces, Specification (approval), Technical fluids, gases, and fuels, Testing, Wall thicknesses, Weights
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta