Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 17916:2015-05

DIN EN ISO 17916:2015-05

Safety of thermal cutting machines (ISO/DIS 17916:2015); German and English version prEN ISO 17916:2015 / Note: Date of issue 2015-04-24

Sécurité des machines de coupage thermique (ISO/DIS 17916:2015); Version allemande et anglaise prEN ISO 17916:2015 / Attention: Date de parution 2015-04-24

Sicherheit von Maschinen zum thermischen Trennen (ISO/DIS 17916:2015); Deutsche und Englische Fassung prEN ISO 17916:2015 / Achtung: Erscheinungsdatum 2015-04-24

Fecha Anulación:
2016-11 /Withdrawn
Equivalencias internacionales:

ISO/DIS 17916 (2015-04)

prEN ISO 17916 (2015-02)

Relación con otras normas DIN:

Reemplaza a: DIN EN ISO 17916:2013-07

Reemplazada por: DIN EN ISO 17916:2016-11

Resumen:
This standard specifies the safety requirements and measures for machinery covering design, construction, production, transport, installation, operation, maintenance and putting out of service. This standard applies to machinery using thermal cutting and or marking processes such as oxy-fuel, plasma arc. This standard applies to machinery the basis of which is either designed as open gantry, cantilever machine or the track of which is incorporated in the cutting table. This standard applies to any machine regardless of work piece or how the work piece is supported . This document does not cover design standards for specific tools, e. g. oxy-fuel hose standards, electrical requirements for plasma power supplies. Most tools used on thermal cutting machines have specific design standards. Risks arising from thermal cutting tools may be covered by related standards. Risks arising from laser radiation, except those caused by position indicating lasers, are not covered by this standard. Those risks are covered by ISO 11553. Machines that combine thermal processes with other processes (e. g. grinding, drilling, milling etc.) are only partly covered. Risks arising from these other processes may be covered by related standards.
Keywords:
Abrasion, Accident prevention, Anatomical configurations, Combustion, Communication, Contact, Cutting, Definitions, Design, Electrical engineering, Electrical safety, Electricity, Emission, Entanglement hazards, Equipment safety, Ergonomics, Evaluations, Eyes, Fatigue, Flame cutting, Hand control, Handling, Hazard analysis, Hazards, Human factors, Impact, Industrial machines, Infrared light, Laser equipment, Layout, Light, Lighting systems, Machines, Maintenance, Malfunction, Mechanical crimping, Mechanical engineering, Mechanical safety, Noise (environmental), Occupational safety, Operating devices, Operating instructions, Operation, Operators (personnel), Precautionary measures, Protective measures, Radiation, Risk, Risk analysis, Safety, Safety design, Safety devices, Safety engineering, Safety function, Safety measures, Safety of machinery, Safety of products, Safety requirements, Signal devices, Signals, Slipping, Specification (approval), Stumble, Surveillance (approval), Temperature, Thermal cutting, Thermal cutting equipment, Thermal hazards, Type approval, Ultraviolet, User information, Vapours, Velocity, Warning devices, Warning notices, Warning system, Warnings, Working places, Workplace safety
95,14
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta