Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 16530-1:2015-06

DIN EN ISO 16530-1:2015-06

Petroleum and natural gas industries - Well integrity - Part 1: Life cycle governance (ISO/DIS 16530-1:2015); German and English version prEN ISO 16530-1:2015 / Note: Date of issue 2015-05-15

Pétrole et industries du gaz naturel - Intégrité du puits - Partie 1: Gouvernance du cycle de vie (ISO/DIS 16530-1:2015); Version allemande et anglaise prEN ISO 16530-1:2015 / Attention: Date de parution 2015-05-15

Erdöl- und Erdgasindustrie - Bohrungsintegrität - Teil 1: Leitlinien zur Lebenszykluslenkung (ISO/DIS 16530-1:2015); Deutsche und Englische Fassung prEN ISO 16530-1:2015 / Achtung: Erscheinungsdatum 2015-05-15

Fecha Anulación:
2016-02 /Withdrawn
Equivalencias internacionales:

ISO/DIS 16530-1 (2015-03)

prEN ISO 16530-1 (2015-03)

Relación con otras normas DIN:

Reemplazada por: DIN EN ISO 16530-1:2016-02

This part of ISO 16530 applies to all wells that are utilised by the oil and gas industry, regardless of their age, type or location, including subsea, onshore and offshore wells. It provides minimum requirements and further guidance to the oil and gas industry on how to effectively manage well integrity during the well life cycle. Ensuring well integrity comprises two main building blocks: the first is to ensure as-built well integrity, and the second to manage well integrity throughout the remaining well life after handover from the well construction phase. This part of ISO 16530 addresses each stage of the well life cycle, as defined by the six phases below, and describes the deliverables that are required between each hase within a Well Integrity Management System: a) The "Basis of Design Phase" identifies the probable safety and environmental exposure to surface and subsurface hazards and risks that can be encountered during the well life cycle. Once identified, these hazards and risks are assessed such that control methods of design and operation can be developed in subsequent phases of the well life cycle. b) The "Design Phase" identifies the controls that are to be incorporated into the well design, such that appropriate barriers can be established to manage the identified safety and environmental hazards. The design addresses the expected, or forecast, changes during the well life cycle and assures that the required barriers in the well´s design are based on risk exposure to people and the environment. c) The "Construction Phase" defines the required or recommended elements to be constructed (including rework/repair) and verification tasks to be performed in order to achieve the intended design. It addresses any variations from the design which require a revalidation against the identified hazards and risks. d) The "Operational Phase" defines the requirements or recommendations and methods for managing well integrity during operation. e) The "Intervention Phase" (including work-over) defines the minimum requirements or recommendations for assessing well barriers prior to, and after, a well intervention which requires breaking the established well barrier containment system. f) The "Abandonment Phase" defines the requirements or recommendations for permanently abandoning a well. This part of ISO 16530 is not applicable to well control. Well control refers to activities implemented to prevent or mitigate unintentional release of formation fluids and gases from the well to its surroundings. It applies to drilling, completion, workover, abandonment and well servicing operations, and involves dynamic elements, i.e. BOPs, mud pumps, mud systems, etc. This part of ISO 16530 is not applicable to wellbore integrity, sometimes referred to as "borehole stability". Wellbore integrity is the capacity of the drilled open hole to maintain its shape and remain intact after having been drilled.
Bore holes, Definitions, Design, Holes, Improvement, Life cycles, Management, Natural gas industries, Oil industries, Operation, Phases, Process, Process monitoring, Process optimisation, Put out of action, Quality assurance, Quality management, Risk assessment, Surveillance (approval), Wells
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta