Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 17945:2015-08

DIN EN ISO 17945:2015-08

Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015); German version EN ISO 17945:2015

Industries du pétrole, de la pétrochimie et du gaz naturel - Matériaux métalliques résistant à la fissuration sous contrainte induite par les sulfures pour utilisation dans des environnements corrosifs de raffinage du pétrole (ISO 17945:2015); Version allemande EN ISO 17945:2015

Erdöl-, petrochemische und Erdgasindustrie - Metallische Werkstoffe beständig gegen Schwefelwasserstoff-Rissbildung in korrosiver Erdölraffinerieumgebung (ISO 17945:2015); Deutsche Fassung EN ISO 17945:2015

2015-08 /Active
Equivalencias internacionales:

EN ISO 17945 (2015-04)

ISO 17945 (2015-04)

Relación con otras normas DIN:
This International Standard establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H<(Index)2>S either as a gas or dissolved in an aqueous (liquid water) phase with or without the presence of hydrocarbon. This International Standard does not include and is not intended to include design specifications. Other forms of wet H<(Index)2>S cracking, environmental cracking, corrosion, and other modes of failure are outside the scope of this International Standard. It is intended to be used by refiners, equipment manufacturers, engineering contractors, and construction contractors. Specifically, this International Standard is directed at the prevention of SSC of equipment (including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases) and components used in the refining industry. Prevention of SSC in carbon steel categorized under P-No. 1 in Section IX of the ASME Boiler and Pressure Vessel Code (BPVC) is addressed by requiring compliance with NACE SP0472. This International Standard applies to all components of equipment exposed to sour refinery environments (see Clause 6) where failure by SSC would (1) compromise the integrity of the pressurecontainment system, (2) prevent the basic function of the equipment, and/or (3) prevent the equipment from being restored to an operating condition while continuing to contain pressure.
Alloys, Aluminium alloys, Cast-iron, Ceramic coatings, Coatings, Cobalt alloys, Copper alloys, Corrosion, Corrosion protection, Corrosive, Cracking, Definitions, Environment, Environmental condition, Ferrous metals, Hydrogen sulphide, Iron, Metallic materials, Natural gas industries, Nickel alloys, Oil industries, Petrochemistry, Petroleum refining, Resistance, Spraying (coating), Stainless steels, Steels, Sulphides, Welding
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta