Saltar navegación principal
Normas DIN – AENOR
DIN EN 16809-1:2015-01

DIN EN 16809-1:2015-01

Thermal insulation products for buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose filled products before installation; German version prEN 16809-1:2014 / Note: Date of issue 2014-12-05

Produits isolants thermique pour le bâtiment - Produits formés in-situ à base de perles de polystyrène expansé (EPS) avec et sans liant - Partie 1: Spécification des produits avec et sans liant avant l'installation; Version allemande prEN 16809-1:2014 / Attention: Date de parution 2014-12-05

Wärmedämmstoffe für Gebäude - An der Verwendungsstelle hergestellte Produkte aus losen expandierten Polystyrolkugeln (EPS) und gebundenen Polystyrolkugeln - Teil 1: Spezifikation für gebundene und lose Schütt- und Einblasdämmstoffe vor dem Einbau; Deutsche Fassung prEN 16809-1:2014 / Achtung: Erscheinungsdatum 2014-12-05

Fecha Anulación:
2018-07 /Withdrawn
Equivalencias internacionales:

prEN 16809-1 (2014-11)

Relación con otras normas DIN:

Reemplazada por: DIN EN 16809-1:2018-07

This European Standard specifies the requirements for products of loose-filled expanded polystyrene (EPS) beads and bonded polystyrene beads for in-situ installation in masonry cavity walls and frame constructions. This European Standard is a specification for the insulation products before installation. It describes the product characteristics and includes procedures for testing, marking and labelling. This document does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. NOTE To avoid water penetration in masonry walls special tests adjusted to local climate might be needed. This document does not cover factory made expanded polystyrene (EPS) insulation products or factory made or in-situ products intended to be used for the insulation of building equipment and industrial installations. Products with a declared thermal resistance lower than 0,25 m2·K/W or a declared thermal conductivity greater than 0,060 W/(m·K) at 10 °C are not covered by this document. This document does not cover products intended for airborne sound insulation and for acoustic absorption applications.
Buildings, Conformity assessment, Construction, Construction materials, Constructional products, Definitions, Dimensions, Durability, Foamed plastics, Foamed rubber, In situ, Inspection, Insulating materials, Insulations, Marking, Material properties, Mathematical calculations, Measurement, Polystyrene, Properties, Quality assurance, Ratings, Specification (approval), Spherical shape, Surface spread of flame, Testing, Thermal conductivity, Thermal insulating materials, Thermal insulation, Thermal protection, Thermal resistance
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta