Saltar navegación principal
Normas DIN – AENOR
DIN 89266:2014-11

DIN 89266:2014-11

Double-pole coupling socket-outlets with protective contact DC 10 A, AC 16 A, AC/DC 250 V, degree of protection IP56 / Note: Date of issue 2014-10-17

Prises d'accouplement bipolaires à contact de protection - DC 10 A, AC 16 A, AC/DC 250 V, degré de protection IP56 / Attention: Date de parution 2014-10-17

Zweipolige Kupplungsdosen mit Schutzkontakt - DC 10 A, AC 16 A, AC/DC 250 V, Schutzgrad IP56 / Achtung: Erscheinungsdatum 2014-10-17

Fecha Anulación:
2016-03 /Withdrawn
Relación con otras normas DIN:

Reemplazada por: DIN 89266:2016-03

Resumen:
This standard applies to coupling socket-outlets which are preferably used in ships. They consist of a casing with screw cap and a contact insert according to DIN 89320. The cable inlet is carried out with a cable screw bushing according to DIN 89283. The coupling socket-outlets are intended for electrical installations with operating voltages up to 250 V and designed for the connection of two- and three-wire electrical cables, e. g. rubber-sheathed cable H07RN F according to DIN EN 50525-2-21 (VDE 0285-525-2-21) or similar cable designs with insulated wires with a nominal cross-section up to 2,5 mm<(hoch)2> The two types with rated voltages up to and including 150 V and exceeding 150 V up to 250 V allow the use of two operating voltage systems on one ship. Suitable plugs are described in DIN 89267. rposes.
Keywords:
Cable couplings, Connectored joints, Contact sleeves, Copper zinc alloys, Degrees of protection, Design, Dimensions, Earthing contacts, Electric sockets, Enclosures, Inventories, Layout, Materials, Plastics, Service voltage, Shipbuilding, Specification (approval), Two-pole, Types
41,68
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta