Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 17294-2:2014-12

DIN EN ISO 17294-2:2014-12

Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes (ISO/DIS 17294-2:2014); German version prEN ISO 17294-2:2014 / Note: Date of issue 2014-11-07

Qualité de l'eau - Application de la spectrométrie de masse avec plasma à couplage inductif (ICP-MS) - Partie 2: Dosage des éléments sélectionnés y compris les isotopes d'uranium (ISO/DIS 17294-2:2014); Version allemande prEN ISO 17294-2:2014 / Attention: Date de parution 2014-11-07

Wasserbeschaffenheit - Anwendung der induktiv gekoppelten Plasma-Massenspektrometrie (ICP-MS) - Teil 2: Bestimmung von ausgewählten Elementen einschließlich Uran-Isotope (ISO/DIS 17294-2:2014); Deutsche Fassung prEN ISO 17294-2:2014 / Achtung: Erscheinungsdatum 2014-11-07

Fecha Anulación:
2017-01 /Withdrawn
Equivalencias internacionales:

ISO/DIS 17294-2 (2014-10)

prEN ISO 17294-2 (2014)

Relación con otras normas DIN:

Reemplazada por: DIN EN ISO 17294-2:2017-01

Resumen:
This document specifies a method for the determination of the elements aluminium, antimony, arsenic, barium, beryllium, bismuth, boron, cadmium, caesium, calcium, cerium, chromium, cobalt, copper, dysprosium, erbium, europium, gadolinium, gallium, germanium, gold, hafnium, holmium, indium, iridium, lanthanum, lead, lithium, lutetium, magnesium, manganese, molybdenum, neodymium, nickel, palladium, phosphorus, platinum, potassium, praseodymium, rubidium, rhenium, rhodium, ruthenium, samarium, scandium, selenium, silver, sodium, strontium, terbium, tellurium, thorium, thallium, thulium, tin, tungsten, uranium and its isotopes, vanadium, yttrium, ytterbium, zinc, and in water [for example drinking water, surface water, ground water, waste water and eluates]. Taking into account the specific and additionally occurring interferences, these elements can also be determined in digests of water, sludges and sediments (for example digests of water as specified in ISO 15587-1 or ISO 15587-2). The working range depends on the matrix and the interferences encountered. In drinking water and relatively unpolluted waters, the lower limit of application is between 0,01 µg/l and 1,0 µg/l for most elements. The working range typically covers concentrations between several pg/l and mg/l depending on the element and pre-defined requirements.
Keywords:
Analysis, Cations, Chemical, Chemical analysis and testing, Chemistry of water, Definitions, Detection limits, Detectors (circuits), Determination, Determination of content, Ground water, ICP, Investigations, Isotopes, Mass spectrometry, Methods, Plasma, Potable water, Sewage, Spectrometry, Standard methods, Surface water, Test equipment, Testing, Untreated water, Uranium isotopes, Verification, Water, Water analysis, Water practice, Water quality, Water testing
93,27
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta