Saltar navegación principal
Normas DIN – AENOR
DIN EN 1253-1:2015-03

DIN EN 1253-1:2015-03

Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm; German version EN 1253-1:2015

Avaloirs et siphons pour bâtiments - Partie 1: Siphons de sol avec garde d'eau de 50 mm minimum; Version allemande EN 1253-1:2015

Abläufe für Gebäude - Teil 1: Bodenabläufe mit Geruchverschluss mit einer Geruchverschlusshöhe von mindestens 50 mm; Deutsche Fassung EN 1253-1:2015

2015-03 /Active
Equivalencias internacionales:

EN 1253-1 (2015-01)

TS EN 1253-1 (2018-11-07)

Relación con otras normas DIN:

Reemplaza a: DIN EN 1253-1:2003-09

Reemplaza a: DIN EN 1253-2:2004-03

Reemplaza a: DIN EN 1253-1:2013-02

This document classifies floor gullies for use inside buildings, gives guidance for places of installation and specifies requirements for the construction, design, performance and marking of factory made gullies for buildings, irrespective of the material, for use in drainage systems requiring a trap with a depth of water seal of at least 50 mm. Although normally used to convey domestic wastewater and industrial wastewater, these floor gullies can convey other wastewater provided there is no risk of damage to components or of injury to health.This standard does not apply to linear drainage channels as specified in EN 1433, gully tops and manhole tops as specified in EN 124, roof drains and floor gullies without trap as specified in EN 1253-2.
Accessories, Building drainage, Buildings, Capacitive loads, Classification, Covers, Definitions, Dimensions, Discharge rate, Drainage, Fitness for purpose, Floor drains, Gravity, Gullies, Impermeability, Land drainage works, Loading tests, Mounting location, Odor seals, Sewage engineering, Sewers, Specification (approval), Temperature behaviour, Test methods, Testing, Thermal cycling, Tightness, Traps (drainage), Types, Waste-water drainage, Water practice
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta