Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 18217:2014-03

DIN EN ISO 18217:2014-03

Safety of woodworking machines - Edge banding machines fed by chain(s) (ISO/DIS 18217:2014); German version prEN ISO 18217:2014 / Note: Date of issue 2014-02-07

Sécurité des machines pour le travail du bois - Machines de tenonnage - Machines à plaquer sur chant à alimentation par chain(s) (ISO/DIS 18217:2014); Version allemande prEN ISO 18217:2014 / Attention: Date de parution 2014-02-07

Sicherheit von Holzbearbeitungsmaschinen - Kantenanleimmaschinen mit Kettenbandvorschub (ISO/DIS 18217:2014); Deutsche Fassung prEN ISO 18217:2014 / Achtung: Erscheinungsdatum 2014-02-07

Fecha Anulación:
2015-12 /Withdrawn
Equivalencias internacionales:

ISO/DIS 18217 (2014-01)

prEN ISO 18217 (2014-01)

Relación con otras normas DIN:

Reemplazada por: DIN EN ISO 18217:2015-12

This document deals with all the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to edge banding machines fed by chain (s) where the loading and unloading is manual and where the maximum work-piece height capacity is 75 mm. The machine is designed to process in one pass, one end (single end machine) or both ends (double end machine) of solid wood, chipboard, fibreboard or plywood and also these materials where they are covered with plastic laminate or edgings. The work-piece is fed through the processing units by an integrated feed. For the purpose of this document an edge banding machine fed by chain (s) is hereinafter referred to as the machine. This document does not apply to single and double end edge banding machines fed by chain or chains with a complete enclosure as defined in 3.3.10. This document does not deal with any hazards relating to: a) mechanical loading of the work-piece to a single machine; or b) single machine being used in combination with any other machine (as part of a line); or c) use of tools working between the machine halves (see 3.3.1); or d) use of laser. For Computer Numerically Controlled (CNC) machines this document does not cover hazards related to Electro-Magnetic Compatibility (EMC). This document is primarily directed to machines which are manufactured after the date of publication by CEN.
Charging by hand, Controls, Definitions, Dimensional tolerances, Edge lipping and banding machines, Ergonomics, Feed, Glueing, Hazards, Machine tools, Manual loading, Marking, Mechanical engineering, Operating instructions, Protective measures, Safety, Safety of machinery, Safety requirements, Slot mortising machines, Specification (approval), Tenoning machines, User information, Woodworking machines
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta