Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 15551-1:2013-12

DIN EN ISO 15551-1:2013-12

Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO/DIS 15551-1:2013); English version prEN ISO 15551-1:2013, only on CD-ROM / Note: Date of issue 2013-12-20*CD-ROM

Industries du pétrole et du gaz naturel - Équipement de forage et de production - Partie 1: Systèmes électriques de pompes submersibles pour l´ascension artificielle (ISO/DIS 15551-1:2013); Version anglaise prEN ISO 15551-1:2013, seulement en CD-ROM / Attention: Date de parution 2013-12-20*CD-ROM

Erdöl- und Erdgasindustrie - Bohrloch-Ausrüstungen - Teil 1: Elektrische Tauchpumpen zur Förderung (ISO/DIS 15551-1:2013); Englische Fassung prEN ISO 15551-1:2013, nur auf CD-ROM / Achtung: Erscheinungsdatum 2013-12-20*CD-ROM

Fecha Anulación:
2015-10 /Withdrawn
Equivalencias internacionales:

ISO/DIS 15551-1 (2013-08)

prEN ISO 15551-1 (2013-08)

Relación con otras normas DIN:

Reemplazada por: DIN EN ISO 15551-1:2015-10

This part of ISO 15551 provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluations, handling and storage of tubing-deployed electrical submersible pump (ESP) systems as defined herein. This part of ISO 15551 is applicable to those components meeting the definition of centrifugal pumps including gas handling devices, discharge heads, seal chamber sections, intake systems, mechanical gas separators, induction motors (herein motor), shaft couplings, motor lead extension, pothead and power cables, as defined herein. Components supplied under the requirements of this part of ISO 15551 exclude previously used subcomponents. Additionally, this International Standard provides requirements for assembled ESP systems. This part of ISO 15551 includes normative annexes addressing design validation performance rating requirements by component, requirements for determining ratings as an assembled system, functional evaluation: single component and cable reference information. This part of ISO 15551 includes informative annexes addressing functional evaluation guidelines for assembled ESP systems, establishing recommended operating range (ROR) of the ESP system, example user/purchaser ESP functional specification form, considerations for the use of 3-phase low and medium voltage adjustable speed drives for ESP applications, analysis after ESP use, downhole monitoring of ESP assembly operation and information on permanent magnet motors for ESP applications. Equipment not covered by this part of ISO 15551 includes: wireline and coiled tubing-deployed ESP systems, motor and pump shrouds, electric penetrators and feed-through systems, cable clamps and banding, centralizers, intake screens, passive gas separators, by-pass tools, check and bleeder valves, component adaptors, capillary lines, electric surface control equipment, downhole permanent magnet motors and non-conventionally configured ESP systems such as inverted systems. Repair and redress equipment requirements are not covered in this part of ISO 15551. The terminology used within this standard is; "ESP assembly" for a system of products combined into an operational machine, "component" for individual products such as, pumps or seal chamber sections, and "subcomponent" for individual parts or subassemblies that are used in the construction of an individual component.
Bore holes, Components, Definitions, Electrically-operated devices, Equipment, Natural gas, Natural gas extraction, Natural gas industries, Oil industries, Oil production, Petroleum, Pumps, Quality assurance, Specification (approval), Submersible pumps, Wells
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta