Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 18134-3:2013-10

DIN EN ISO 18134-3:2013-10

Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample (ISO/DIS 18134-3:2013); German version prEN ISO 18134-3:2013 / Note: Date of issue 2013-10-11

/ Attention: Date de parution 2013-10-11

Feste Biobrennstoffe - Bestimmung des Wassergehaltes - Ofentrocknung - Teil 3: Wassergehalt in allgemeinen Analysenproben (ISO/DIS 18134-3:2013); Deutsche Fassung prEN ISO 18134-3:2013 / Achtung: Erscheinungsdatum 2013-10-11

Fecha Anulación:
2015-12 /Withdrawn
Equivalencias internacionales:

ISO/DIS 18134-3 (2013-09)

prEN ISO 18134-3 (2013-09)

Relación con otras normas DIN:

Reemplazada por: DIN EN ISO 18134-3:2015-12

This document describes the method of determining the moisture in the analysis sample by drying the sample in an oven. It is intended to be used for general analysis samples according to ISO WD XXXXX (14780). The method described in this document is applicable to all solid biofuels. Since biofuels in small particle size are very hygroscopic, their moisture content will vary with the change of humidity of the atmosphere and therefore, the moisture of the analyses sample should always be determined simultaneously when portions are weighed out for other analytical determinations, for example calorific value, carbon, nitrogen.
Analysis, Analysis samples, Biofuels, Biomass, Content, Determination of content, Drying, Materials testing, Mathematical calculations, Oven drying, Samples, Solid fuels, Specimen preparation, Water, Water content
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta