Saltar navegación principal
Normas DIN – AENOR
DIN ISO 26622-1:2013-08

DIN ISO 26622-1:2013-08

Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks (ISO 26622-1:2008)

Interfaces à cône modulaire avec système de serrage à billes - Partie 1: Dimensions et désignation des queues (ISO 26622-1:2008)

Modulare Kegelschnittstelle mit Kugellaufbahnsystem - Teil 1: Maße und Bezeichnung von Schäften (ISO 26622-1:2008)

Fecha:
2013-08 /Active
Equivalencias internacionales:

ISO 26622-1 (2008-11)

Relación con otras normas DIN:
Resumen:
This standard specifies dimensions for modular taper interfaces with ball track system - tapered shanks for automatic and manual tool exchange to be applied on machine tools (e. g. lathe machines, drilling machines, milling machines and turn/milling machine centres). A range of shank sizes is specified. The shank incorporates a flange with a groove to enable automatic tool exchange. The tools may also be exchanged manually. The clamping of the shank can be realized by the use of locking balls of a standard size. This may be realized by the use of various mechanisms. The torque is transmitted at the tail end of the shank by friction, locking elements, and keys.
Keywords:
Automatic, Ball track, Cones, Conics, Connecting sizes, Designations, Dimensions, Exchangeable, Interfaces, Machine tools, Machines, Modular, Recording, Resilience, Sealing rings, Shanks, Shape, Spindles, Taper shanks, Tapered, Tolerances (measurement), Tool exchanges, Tool holding fixtures, Tools, Torque, Tubular fasteners
58,5
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta