Saltar navegación principal
Normas DIN – AENOR
DIN EN 1591-1:2014-04

DIN EN 1591-1:2014-04

Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation; German version EN 1591-1:2013

Brides et leurs assemblages - Règles de calcul des assemblages à brides circulaires avec joint - Partie 1: Méthode de calcul; Version allemande EN 1591-1:2013

Flansche und ihre Verbindungen - Regeln für die Auslegung von Flanschverbindungen mit runden Flanschen und Dichtung - Teil 1: Berechnung; Deutsche Fassung EN 1591-1:2013

Fecha:
2014-04 /Active
Equivalencias internacionales:

EN 1591-1 (2013-12)

Relación con otras normas DIN:

Reemplaza a: DIN EN 1591-1:2012-02

Reemplaza a: DIN EN 1591-1:2011-08

Resumen:
This European Standard defines a calculation method for bolted, gasketed, circular flange joints. Its purpose is to ensure structural integrity and control of leak tightness. It uses gasket parameters based on definitions and test methods specified in EN 13555. The calculation method is not applicable to joints with a metallic contact out of the sealing face or to joints whose rigidity varies appreciably across gasket width. For gaskets in incompressible materials which permit large deformations, the results given by the calculation method can be excessively conservative (i.e. required bolting load too high, allowable pressure of the fluid too low, required flange thickness too large, etc.).
Keywords:
Calculating methods, CE marking, Circular shape, Definitions, Design, Designations, Flange connections, Flanged fittings, Flanges, Force, Gaskets, Loading, Locking and locating devices, Materials, Mathematical calculations, Pipe couplings, Ratings, Screws (bolts)
143,18
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta