Saltar navegación principal
Normas DIN – AENOR
DIN EN 16585-2:2013-07

DIN EN 16585-2:2013-07

Railway applications - Design for PRM Use Equipment and Components onboard Rolling Stock - Part 2: Elements for sitting, standing and moving; German version prEN 16585-2:2013 / Note: Date of issue 2013-10-25

Applications ferroviaires - Conception à l'usage des personnes à mobilité réduite - Équipements et éléments à bord du matériel roulant - Partie 2: Dispositifs pour la position assise, la position debout et le déplacement; Version allemande prEN 16585-2:2013 / Attention: Date de parution 2013-10-25

Bahnanwendungen - Gestaltung für mobilitätseingeschränkte Menschen - Ausrüstungen und Bauteile in Schienenfahrzeugen - Teil 2: Elemente zum Sitzen, Stehen und Fortbewegen; Deutsche Fassung prEN 16585-2:2013 / Achtung: Erscheinungsdatum 2013-10-25

Fecha Anulación:
2017-05 /Withdrawn
Equivalencias internacionales:

prEN 16585-2 (2013-06)

Relación con otras normas DIN:

Reemplazada por: DIN EN 16585-2:2017-05

This standard describes the specific "Design for PRM Use" requirements applying to rolling stock on the Trans-European Network (TEN) covered by the TSI for PRM and the assessment of those requirements. The following applies to this standard. - The definitions and requirements describe specific aspects of "Design for PRM Use" required by people with reduced mobility as defined in TSI PRM. - This standard defines elements which are universally valid for obstacle free travelling including toilets, elements for sitting/standing/moving and passageways/internal doors. The definitions and requirements of this standard are to be used for rolling stock applications. - This part of the standard covers those requirements relating to sitting, standing and moving about the train. - The standard only refers to aspects of accessibility for PRM passengers it does not define general requirements and general definitions for specific components and systems. - This standard assumes that the vehicle is in the defined operating condition, any damages or operating failures shall not be taken into account when assessing these requirements. The following areas of "Equipment and Components" from TSI PRM are covered in 3 parts: - Part 1 contains Toilets - Part 2 contains Handholds Seats Wheelchair spaces - Part 3 contains Passage ways Internal Doors This standard describes these areas with clear and consistent terms and definitions. Measurement methods and/or assessment procedures needed to establish a clear pass/fail assessment are provided where necessary.
Access aid, Access openings, Accessible, Aid, Coaches, Definitions, Examination (quality assurance), Handicapped persons, Handles, Holding devices, Lifting appliances, Maintenance, Mobility restricted, Passenger compartments, Railway applications, Railway vehicles, Railways, Seats, Suitable for handicapped persons, Wagons, Wheel chair users, Wheelchairs
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta