Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 6506-3:2013-03

DIN EN ISO 6506-3:2013-03

Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO/DIS 6506-3:2013); German version prEN ISO 6506-3:2013 / Note: Date of issue 2013-03-18

Matériaux métalliques - Essai de dureté Brinell - Partie 3: Étalonnage des blocs de référence (ISO/DIS 6506-3:2013); Version allemande prEN ISO 6506-3:2013 / Attention: Date de parution 2013-03-18

Metallische Werkstoffe - Härteprüfung nach Brinell - Teil 3: Kalibrierung von Härtevergleichsplatten (ISO/DIS 6506-3:2013); Deutsche Fassung prEN ISO 6506-3:2013 / Achtung: Erscheinungsdatum 2013-03-18

Fecha Anulación:
2015-02 /Withdrawn
Equivalencias internacionales:

ISO/DIS 6506-3 (2013-03)

prEN ISO 6506-3 (2013-03)

Relación con otras normas DIN:

Reemplazada por: DIN EN ISO 6506-3:2015-02

Resumen:
This part of ISO 6506 specifies a method for the calibration of reference blocks to be used in the indirect verification of Brinell hardness testing machines as described in ISO/DIS 6506-2:2012. The procedures necessary to ensure metrological traceability of the calibration machine are also specified. The agency conducting the standardizations of test blocks shall be accredited to the requirements of ISO/IEC 17025 (or an equivalent) by an accrediting body recognized by the International Laboratory Accreditation Cooperation (ILAC) as operating to the requirements of ISO/IEC 17011. The standardizing agency shall have a certificate/scope of accreditation stating the hardness scales that are covered by the accreditation, and the standards to which the test block standardizations are traceable.
Keywords:
Brinell, Brinell hardness, Brinell hardness measurement, Calibration, Designations, Hardening test sheets, Hardness measurement, Hardness testers, Indentation measuring devices, Manufacturing, Marking, Material testing machines, Material tests, Materials testing, Measuring, Measuring equipment, Measuring uncertainty, Mechanical testing, Metallic, Metallic materials, Metals, Penetrant flaw detection, Production, Products, Reference standards, Shape, Specification (approval), Symbols, Test equipment, Test forces, Testing, Tolerances (measurement)
64,67
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta