Saltar navegación principal
Normas DIN – AENOR
DIN EN 16025-1:2013-07

DIN EN 16025-1:2013-07

Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster; German version EN 16025-1:2013 / Note: To be replaced by DIN EN 16025-1 (2018-09).

Produits isolants thermiques et/ou acoustiques utilisés dans la construction des bâtiments - Empierrements en PSE lié - Partie 1: Exigences pour un pré-mélange en usine plâtre sec PSE; Version allemande EN 16025-1:2013 / Attention: À remplacer par DIN EN 16025-1 (2018-09).

Wärmedämmstoffe für den Wärme- und/oder Schallschutz im Hochbau - Gebundene EPS-Schüttungen - Teil 1: Anforderungen an den werkmäßig vorgemischten EPS-Trockenmörtel; Deutsche Fassung EN 16025-1:2013 / Achtung: Vorgesehener Ersatz durch DIN EN 16025-1 (2018-09).

Fecha:
2013-07 /Active
Equivalencias internacionales:

EN 16025-1 (2013-05)

Relación con otras normas DIN:

Reemplaza a: DIN EN 16025-1:2009-12

Resumen:
This European Standard specifies the requirements for in-situ formed bound EPS products (BEPS) for the thermal and/or sound insulation of buildings when applied to walls, ceilings, roofs and floors. This European Standard covers products which are manufactured as premixed EPS dry plaster/mortar in a factory or mobile production unit This European Standard is a specification for the bound EPS products before installation. This European Standard describes the product characteristics and includes procedures for testing, marking and labelling and the rules for evaluation of conformity. This European Standard does not specify the required class or level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal conductivity at 10 °C greater than 0,18 W/(m · K) are not covered by this European Standard. This European Standard does not cover factory made insulation products in the form of prefabricated shapes or boards made of bound EPS. This European Standard also specifies performance requirements for airborne sound insulation and for acoustic absorption applications.
Keywords:
Buildings, CE marking, Compression stresses, Construction, Construction materials, Constructional products, Definitions, Dumps, Fresh mortar, Insulating materials, Marking, Materials, Mortars, Noise control (acoustic), Polystyrene, Ready-made mortars, Rigid foams, Specification, Specification (approval), Testing, Thermal protection
88,32
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta