Saltar navegación principal
Normas DIN – AENOR
DIN EN 1124-4:2012-02

DIN EN 1124-4:2012-02

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships; German version prEN 1124-4:2012 / Note: Date of issue 2012-02-13

Tubes et raccords à manchon enfichable en acier inoxydable, soudés longitudinalement pour réseaux d'assainissement - Partie 4: Composants utilisés pour les systèmes d'évacuation sous vide et gravitaires installés sur les navires; Version allemande prEN 1124-4:2012 / Attention: Date de parution 2012-02-13

Rohre und Formstücke aus längsnahtgeschweißtem nichtrostendem Stahlrohr mit Steckmuffe für Abwasserleitungen - Teil 4: Bauteile für Unterdruckentwässerungssysteme und Entwässerungssysteme auf Schiffen; Deutsche Fassung prEN 1124-4:2012 / Achtung: Erscheinungsdatum 2012-02-13

Fecha Anulación:
2014-02 /Withdrawn
Equivalencias internacionales:

prEN 1124-4 (2012-02)

Relación con otras normas DIN:

Reemplazada por: DIN EN 1124-4:2014-02

Resumen:
This European Standard specifies requirements, dimensions and tolerances for pipes and fittings of longitudinally welded, stainless steel pipe with spigot and socket used for vacuum drainage systems inside and outside buildings and for gravity and vacuum drainage systems on ships and floating maritime structures1)- above freeboard deck as long as the heeling is taken into account in the event of damage when installed above freeboard deck on passenger ships;- inside a watertight compartment below freeboard deck;- with direct connection to the outboard (not permitted below freeboard deck);- inside tanks as long as these are not filled with foreign media and are not cargo tanks.
Keywords:
Connections, Connectors, Corrosion protection, Designations, Dimensions, Drainage, Drainage works, Fittings, Gravity, Limit deviations, Low pressure, Offshore construction works, Pipelines, Pipes, Seals, Sewage, Sewer pipes, Sewerage, Sewers, Shipbuilding, Ships, Sleeve joints, Sleeves, Sockets, Specification (approval), Stainless steels, Steel pipes, Steel tubes, Steels, Tolerances (measurement), Traps (drainage), Water practice
82,24
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta