Saltar navegación principal
Normas DIN – AENOR
DIN EN ISO 11553-3:2012-01

DIN EN ISO 11553-3:2012-01

Safety of machinery - Laser processing machines - Part 3: Safety requirements for noise reduction and noise measurement methods for laser processing machines and hand-held laser processing devices and associated auxiliary equipment (accuracy grade 2) (ISO/DIS 11553-3:2011); German version prEN ISO 11553-3:2011 / Note: Date of issue 2012-01-23

Sécurité des machines - Machines à laser - Partie 3: Prescriptions de sécurité relatives à la réduction de bruit et méthodes de mesurage du bruit des machines à laser, des dispositifs à laser portatifs et des équipements auxiliaires connexes (classe de précision 2) (ISO/DIS 11553-3:2011); Version allemande prEN ISO 11553-3:2011 / Attention: Date de parution 2012-01-23

Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 3: Sicherheitsanforderungen zur Lärmminderung und Geräuschmessverfahren für Laserbearbeitungsmaschinen und handgeführte Laserbearbeitungsgeräte sowie zugehörige Hilfseinrichtungen (Genauigkeitsklasse 2) (ISO/DIS 11553 3:2011); Deutsche Fassung prEN ISO 11553-3:2011 / Achtung: Erscheinungsdatum 2012-01-23

Fecha Anulación:
2013-07 /Withdrawn
Equivalencias internacionales:

ISO/DIS 11553-3 (2012-01)

prEN ISO 11553-3 (2012-01)

Relación con otras normas DIN:
This part of ISO 11553 describes the requirements for noise hazards and specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of airborne noise emission from laser processing machines and hand-held laser processing devices within the scope of ISO 11553-1 and ISO 11553-2. It specifies the safety requirements relating to those noise hazards. It specifies noise measurement methods, installation and operating conditions to be used for the test together with the information to be supplied by manufacturers of such equipment. This part of ISO 11553 applies to those laser processing machines and hand-held laser processing devices included in the scope of ISO 11553-1 and ISO 11553-2. Noise emission characteristics include emission sound pressure levels at work stations and where required the sound power level. Declared noise emission values permit comparison of laser processing machines and hand-held laser processing devices on the market. The use of this noise test code ensures the reproducibility of the determination of the characteristic noise emission values within specific limits. These limits are determined by the accuracy grade of the noise measuring method used. Noise measurements specified by this part of ISO 11553 are carried out by the engineering method (accuracy grade 2).
Accident prevention, Airborne noise, By-products, Control equipment, Design, Electrical safety, Environmental effects, Equipment safety, Ergonomics, Examination (quality assurance), Gases, Hazards, Health protection, Inscription, Interferences, Labelling, Laser equipment, Laser radiation, Machines, Manual, Manual operation, Measurement, Noise, Noise emissions, Noise (environmental), Noise levels, Noise measurement, Noise reduction, Noise stresses, Occupational safety, Pedestrian-controlled systems, Processing machines, Protection against danger, Protection devices, Protective measures, Radiation, Radiation protection, Risk, Safety, Safety engineering, Safety measures, Safety of machinery, Safety of products, Safety requirements, Smoke, Sound pressure level, Sound propagation, Substances, Testing, User information, Workplace safety
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta