Saltar navegación principal
Normas DIN – AENOR
DIN ISO 16000-25:2012-01

DIN ISO 16000-25:2012-01

Indoor air - Part 25: Determination of the emission of semi-volatile organic compounds by building products - Micro-chamber method (ISO 16000-25:2011)

Air intérieur - Partie 25: Dosage de l'émission de composés organiques semi-volatils des produits de construction - Méthode de la micro-chambre (ISO 16000-25:2011)

Innenraumluftverunreinigungen - Teil 25: Bestimmung der Emission von schwerflüchtigen organischen Verbindungen aus Bauprodukten - Mikro-Prüfkammerverfahren (ISO 16000-25:2011)

2012-01 /Active
Equivalencias internacionales:

ISO 16000-25 (2011-07)

Relación con otras normas DIN:
Semi volatile organic compounds (SVOCs) such as phthalic esters are found in many construction materials. If emitted to the indoor environment they stick to many surfaces and can become a persistent indoor air contaminant, posing a potential long term health risk to building occupants. This part of ISO 16000 specifies a test method for determination of the area specific emission rate of semi volatile organic compounds (SVOCs) from newly produced building products or furnishings under defined climate conditions using a micro-chamber. The method can in principle also be applied to aged products. This measurement method is applicable to products/materials such as board materials, wallpapers, flooring materials, insulation materials, adhesives, paints, etc and products which are combinations of the above. This method can, in principle, be used for most building products used indoors. The determination of semi volatile organic compounds (SVOCs) emitted from building products using micro-chambers in conjunction with standardised sampling, storage of samples and preparation of test specimens has objectives such as: - to provide manufacturers, builders, and end users with emission data useful for the evaluation of the impact of building products on the indoor air quality; - to promote the development of improved products. Sampling, transport and storage of materials to be tested, and preparation of test specimens are described in ISO 16000-11. Air sampling and analytical methods for the determination of SVOCs are described in ISO 16000-6 and ISO 16017-1. An example of a micro-chamber is described in Annex B of this part of ISO 16000-26.
Air, Air quality, Analysis, Chemical analysis and testing, Constructional products, Definitions, Determination, Determination of content, Determination of emission, Determination procedures, Emission, Indoor climate, Indoors, Inner atmosphere, Measuring sites, Metrology, Organic compounds, Planning of measurements, Pollutant concentration, Sampling, Sampling methods, Semi-volatile organic compounds, Test chamber, Volatile matter determination, Volatile organic compound content, Volatile organic compounds
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta